Effect of the substrate on RF power-handling capability of micro-electromechanical capacitive switches

F. Solazzi; C. Palego; S. Halder; J.C. Hwang; A. Faes; V. Mulloni; B. Margesin; P. Farinelli; R. Sorrentino

doi:10.1016/j.sse.2011.06.020

Effect of the substrate on RF power-handling capability of micro-electromechanical capacitive switches

F. Solazzi
, C. Palego
, S. Halder
, J.C. Hwang
, A. Faes
, V. Mulloni
, B. Margesin
, P. Farinelli
, R. Sorrentino

Allbwn ymchwil: Cyfraniad at gyfnodolyn › Erthygl › adolygiad gan gymheiriaid

Crynodeb

RF power-handling capacity of micro-electromechanical capacitive switches was modeled by multiphysics finite-element analysis. Coupled electromechanical, electrothermal and thermomechanical models were constructed by using commercially available software. Simulations by using the models were validated by small- and large-signal RF measurements. The measurements showed that the power-handling capacity of the switches depended on not only the properties of the membrane (the movable part of the switches), but also the substrate properties and the circuit environment. These effects were captured in a compacted model, which could be used to guide the improvement of the power-handling capacity of the switches.

Iaith wreiddiol	Saesneg
Tudalennau (o-i)	219-225
Cyfnodolyn	Solid-State Electronics Special Issue
Cyfrol	65-66
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.1016/j.sse.2011.06.020
Statws	Cyhoeddwyd - 12 Gorff 2011

Mynediad at Ddogfen

10.1016/j.sse.2011.06.020

Dyfynnu hyn

@article{7b9cd44a627647468576099f9eaa4874,

title = "Effect of the substrate on RF power-handling capability of micro-electromechanical capacitive switches",

abstract = "RF power-handling capacity of micro-electromechanical capacitive switches was modeled by multiphysics finite-element analysis. Coupled electromechanical, electrothermal and thermomechanical models were constructed by using commercially available software. Simulations by using the models were validated by small- and large-signal RF measurements. The measurements showed that the power-handling capacity of the switches depended on not only the properties of the membrane (the movable part of the switches), but also the substrate properties and the circuit environment. These effects were captured in a compacted model, which could be used to guide the improvement of the power-handling capacity of the switches.",

author = "F. Solazzi and C. Palego and S. Halder and J.C. Hwang and A. Faes and V. Mulloni and B. Margesin and P. Farinelli and R. Sorrentino",

year = "2011",

month = jul,

day = "12",

doi = "10.1016/j.sse.2011.06.020",

language = "English",

volume = "65-66",

pages = "219--225",

journal = "Solid-State Electronics Special Issue",

issn = "0038-1101",

publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Effect of the substrate on RF power-handling capability of micro-electromechanical capacitive switches

AU - Solazzi, F.

AU - Palego, C.

AU - Halder, S.

AU - Hwang, J.C.

AU - Faes, A.

AU - Mulloni, V.

AU - Margesin, B.

AU - Farinelli, P.

AU - Sorrentino, R.

PY - 2011/7/12

Y1 - 2011/7/12

N2 - RF power-handling capacity of micro-electromechanical capacitive switches was modeled by multiphysics finite-element analysis. Coupled electromechanical, electrothermal and thermomechanical models were constructed by using commercially available software. Simulations by using the models were validated by small- and large-signal RF measurements. The measurements showed that the power-handling capacity of the switches depended on not only the properties of the membrane (the movable part of the switches), but also the substrate properties and the circuit environment. These effects were captured in a compacted model, which could be used to guide the improvement of the power-handling capacity of the switches.

AB - RF power-handling capacity of micro-electromechanical capacitive switches was modeled by multiphysics finite-element analysis. Coupled electromechanical, electrothermal and thermomechanical models were constructed by using commercially available software. Simulations by using the models were validated by small- and large-signal RF measurements. The measurements showed that the power-handling capacity of the switches depended on not only the properties of the membrane (the movable part of the switches), but also the substrate properties and the circuit environment. These effects were captured in a compacted model, which could be used to guide the improvement of the power-handling capacity of the switches.

U2 - 10.1016/j.sse.2011.06.020

DO - 10.1016/j.sse.2011.06.020

M3 - Article

SN - 0038-1101

VL - 65-66

SP - 219

EP - 225

JO - Solid-State Electronics Special Issue

JF - Solid-State Electronics Special Issue

ER -

Effect of the substrate on RF power-handling capability of micro-electromechanical capacitive switches

Crynodeb

Mynediad at Ddogfen

Ôl bys

Dyfynnu hyn