Research Portal

Professor Graham Ormondroyd

Professor

Affiliations

1 - 145 out of 145Page size: 250
Sort by: Type
  1. Article › Research › Peer-reviewed
  2. Published

    A rapid method for investigating the absorption of formaldehyde from air by wool

    Curling, S. F., Loxton, C. & Ormondroyd, G. A., 1 Apr 2012, In: Journal of Materials Science. 47, 7, p. 3248-3251

    Research output: Contribution to journal › Article › peer-review

  3. Published

    A rapid screening method to determine the susceptibility of bio-based construction and insulation products to mould growth

    Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Jan 2017, In: International Biodeterioration and Biodegradation. p. 124-132 8 p., 116.

    Research output: Contribution to journal › Article › peer-review

  4. Published

    A simple method for quantifying the PF resin content of composite wood panels.

    Ormondroyd, G. A. & Grisby, W. J., 1 Aug 2002, In: Holz Als Roh-und Werkstoff. 60, 4, p. 313-315

    Research output: Contribution to journal › Article › peer-review

  5. Published

    A study of the Dimensional Stabilisation of Rubberwood by Reaction with Acetic and Hexanoic Anhydride

    Hill, C., Rafidah, S., Hill, C. A. & Ormondroyd, G. A., 1 Jan 2006, In: Journal of Tropical Forest Science. 18, 4, p. 261-268

    Research output: Contribution to journal › Article › peer-review

  6. Published

    ASSESSMENT AND MONITORING OF AESTHETIC APPEARANCE OF BUILDING BIOMATERIALS ALONG THE SERVICE LIFE

    Ormondroyd, G. & Dimitriou, A., 2017, In: WIT Transactions on Ecology and the Environment . 226, p. 527 536 p.

    Research output: Contribution to journal › Article › peer-review

  7. Published

    Absorption of Volatile Organic Compounds by Different Wool Types

    Mansour, E., Curling, S. F., Stéphan, A. & Ormondroyd, G. A., Mar 2016, In: Green Materials. 4, 1

    Research output: Contribution to journal › Article › peer-review

  8. Published

    An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood.

    Hill, C., Hill, C. A., Forster, S. C., Farahani, M. R., Hale, M. D., Ormondroyd, G. A. & Williams, G. R., 1 Jan 2005, In: International Biodeterioration and Biodegradation. 55, 1, p. 69-76

    Research output: Contribution to journal › Article › peer-review

  9. Published

    An investigation on the possible use of coffee silverskin in PLA/PBS composites

    Aghaye Ghazvini, A. K., Curling, S., Ormondroyd, G., Saccani, A. & Sisti, L., 10 Jun 2022, In: Journal of Applied Polymer Science. 139, 22, 10 p., 52264.

    Research output: Contribution to journal › Article › peer-review

  10. Published

    Assessment of health implications related to processing and use of natural wool insulation products

    Mansour, E., Loxton, C., Elias, R. M. & Ormondroyd, G. A., 1 Dec 2014, In: Environment International. 73, p. 402-412

    Research output: Contribution to journal › Article › peer-review

  11. Published

    Assessment of lignocellulosic nut wastes as an absorbent for gaseous formaldehyde

    Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Apr 2017, In: Industrial Crops and Products. 98, April, p. 25-28 4 p.

    Research output: Contribution to journal › Article › peer-review

  12. Published

    Assessment of the use of dynamic mechanical analysis to investigate initial onset of brown rot decay of Scots pine (Pinus sylvestris L.)

    Ormondroyd, G., Alfredsen, G., Raghavalu Thirumalai, D., Curling, S., Stefanowski, B., Spear, M. & Gobakken, L. R., May 2017, In: International Biodeterioration and Biodegradation. 120, p. 1-5 5 p.

    Research output: Contribution to journal › Article › peer-review

  13. Published

    CO2 laser interactions with wood tissues during single pulse laser-incision

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.

    Research output: Contribution to journal › Article › peer-review

  14. Published

    Changes in the cell wall volume of a number of wood species due to reaction with acetic anhydride

    Kwon, J. H., Hill, C. A., Ormondroyd, G. A. & Karim, S., 1 Mar 2007, In: Holzforschung. 61, 2, p. 138-142

    Research output: Contribution to journal › Article › peer-review

  15. Published

    Comparisons of particleboard produced from Acacia hybrid and a UK commercial particleboard furnish from recycled wood.

    Suffian, M., Ormondroyd, G. A. & Hale, M. D., 1 Jan 2010, In: Journal of Tropical Forest Science. 22, 3, p. 227-236

    Research output: Contribution to journal › Article › peer-review

  16. Published

    Conservation process of archaeological waterlogged wood studied by spectroscopy and gradient NMR methods

    Kowalczuk, J., Rachocki, A., Broda, M., Mazela, B., Ormondroyd, G. & Trite-Goc, J., Nov 2019, In: Wood Science and Technology. 53, 6, p. 1207-1222 16 p.

    Research output: Contribution to journal › Article › peer-review

  17. Published

    Dimensional changes in Corsican pine (Pinus nigra Arnold) modified with acetic anhydride measured using a helium pycnometer

    Hill, C. A. & Ormondroyd, G. A., 1 Aug 2004, In: Holzforschung. 58, 4, p. 544-547

    Research output: Contribution to journal › Article › peer-review

  18. Published

    Dynamic mechanical analysis of Scots pine and three tropical hardwoods

    Ashaduzzaman, M., Hale, M., Ormondroyd, G. & Spear, M., Oct 2020, In: International Wood Products Journal. 11, 4, p. 189-203

    Research output: Contribution to journal › Article › peer-review

  19. Published

    Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products

    Curling, S., Jones, D., Ormondroyd, G. & Williams, A., 2017, In: Arab Gulf Journal of Scientific Research. 34, 2/3

    Research output: Contribution to journal › Article › peer-review

  20. Published

    Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products

    Lahmer, R. A., Morris, A., Curling, S., Ormondroyd, G., Jones, D. & Williams, A., May 2016, In: Assiut Journal of Agricultural Sciences (AJAS). 47, 2, p. 24-28

    Research output: Contribution to journal › Article › peer-review

  21. Published

    Effects of Biological and Chemical Degradation on the Properties of Scots ine Wood—Part I: Chemical Composition and Microstructure of the CellWall

    Broda, M., Popescu, C. M., Curling, S., Timpu, D. I. & Ormondroyd, G., 22 Mar 2022, In: Materials. 15, 7, 15 p.

    Research output: Contribution to journal › Article › peer-review

  22. Published

    Effects of Biological and Chemical Degradation on the Properties of Scots Pine Wood-Part I: Chemical Composition and Microstructure of the Cell Wall

    Broda, M., Popescu, C-M., Curling, S. F., Timpu, D. I. & Ormondroyd, G. A., 22 Mar 2022, In: Materials. 15, 7

    Research output: Contribution to journal › Article › peer-review

  23. Published

    Equilibrium and dynamic vapour water sorption properties of biochar derived from apple wood

    Popescu, C., Hill, C. A., Anthony, R., Ormondroyd, G. A. & Curling, S., 28 Nov 2014, In: Polymer Degradation and Stability. 111, p. 263-268

    Research output: Contribution to journal › Article › peer-review

  24. Published

    Evaluating mould colonisation and growth on MDF panels modified to sequester Volatile Organic Compounds

    Stefanowski, B., Ormondroyd, G. & Curling, S., Dec 2016, In: International Wood Products Journal. 7, 4, p. 188-194

    Research output: Contribution to journal › Article › peer-review

  25. Published

    Evaluation of the Effect of a Combined Chemical and Thermal Modification of Wood though the Use of Bicine and Tricine

    Jones, D., Krzisnik, D., Hocevar, M., Zagar, A., Humar, M., Popescu, C-M., Popescu, M-C., Brischke, C., Nunes, L., Curling, S., Ormondroyd, G. & Sandberg, D., Jun 2022, In: Forests. 13, 6

    Research output: Contribution to journal › Article › peer-review

  26. Published

    Exploring Design Principles of Biological and Living Building Envelopes: What Can We Learn from Plant Cell Walls?

    Xing, Y., Bosch, M., Spear, M., Donnison, I., Ormondroyd, G. & Jones, P., 2018, In: Intelligent Buildings International. 10, 2, p. 78-102

    Research output: Contribution to journal › Article › peer-review

  27. Published

    Feasibility of using straw in a strong, thin, pulp moulded packaging material

    Curling, S., Laflin, N., Davies, G., Ormondroyd, G. & Elias, R., Mar 2017, In: Industrial Crops and Products. 97, p. 395-400

    Research output: Contribution to journal › Article › peer-review

  28. Published

    Flax/Epoxy Composite Beams - Simulation of Flexural Stresses

    Ormondroyd, G., Raghavalu Thirumalai, D. & Zhongwei, G., 1 Apr 2019, In: Material Today: Proceedings. 8, 3, p. 760-768

    Research output: Contribution to journal › Article › peer-review

  29. Published

    Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels

    Huang, P., Chew, Y. M., Chang, W., Ansell, M., Lawrence, M., Latif, E., Shea, A., Ormondroyd, G. & Du, H., 30 Mar 2018, In: Construction and Building Materials. 166, p. 35-49 15 p.

    Research output: Contribution to journal › Article › peer-review

  30. Published

    Improvement of Indoor Air Quality by MDF panels containing walnut shells

    Stefanowski, B., Ormondroyd, G., Da Silva, C. F., Maskell, D., Ansell, M. P., Dengel, A. & Ball, R. J., Oct 2017, In: Building and Environment. 123, p. 427-436

    Research output: Contribution to journal › Article › peer-review

  31. Published

    Improving the impact of plant science on urban planning and design

    Wootton-Beard, P. C., Xing, Y., Raghavalu Thirumalai, D., Robson, P., Bosch, M., Thornton, J. M., Ormondroyd, G., Jones, P. & Donnison, I., 16 Nov 2016, In: Buildings. 6, 4, 48.

    Research output: Contribution to journal › Article › peer-review

  32. Published

    Influence of water and humidity on chemically modifying wood with polybutylene succinate bio-polyester

    Noel, M., Grigsby, W. J., Ormondroyd, G. & Spear, M., Jun 2016, In: International Wood Products Journal. 7, 2, p. 80-88

    Research output: Contribution to journal › Article › peer-review

  33. Published

    Laser incising of wood: A Review

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.

    Research output: Contribution to journal › Article › peer-review

  34. Published

    Life cycle assessment of a novel tannin-boron association for wood protection

    Hu, J., Skinner, C., Ormondroyd, G. & Thevenon, M-F., 1 Feb 2023, In: Science of the Total Environment. 858, 1, 159739.

    Research output: Contribution to journal › Article › peer-review

  35. Published

    Life cycle assessment of pilot-scale wood fibre production using mechanical disc refining at different pressures

    Skinner, C., Stefanowski, B., Heathcote, D., Charlton, A. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 149-155

    Research output: Contribution to journal › Article › peer-review

  36. Published

    Micromorphological studies of surface densified wood

    Laine, K., Segerholm, K., Walinder, M., Rautkari, L., Ormondroyd, G. A., Hughes, M. & Jones, D., 1 Mar 2014, In: Journal of Materials Science. 49, 5, p. 2027-2034

    Research output: Contribution to journal › Article › peer-review

  37. Published

    Modelling and Simulation of Natural Fibre/Epoxy Composites - Prediction of Stress State and Deformations

    Prabhakaran, R. T. D., Gupta, M., Mahajan, P. & Ormondroyd, G. A., 2019, In: International Journal of Materials Engineering Innovation . 10, 2

    Research output: Contribution to journal › Article › peer-review

  38. Published

    Modified wood: review of efficacy and service life testing

    Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203

    Research output: Contribution to journal › Article › peer-review

  39. Published

    Observed and projected changes in the climate based decay hazard of timber in the United Kingdom

    Curling, S. & Ormondroyd, G., 1 Oct 2020, In: Scientific Reports. 10, 8 p., 16287 (2020).

    Research output: Contribution to journal › Article › peer-review

  40. Published

    Ocean Warming, More than Acidification, Reduces Shell Strength in a Commercial Shellfish Species during Food Limitation

    Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 28 Jan 2014, In: PLoS ONE. 9, 1, p. e86764

    Research output: Contribution to journal › Article › peer-review

  41. Published

    Particleboards Bonded by an Imidazole-Based Adhesive System

    Scharf, A., Popescu, C-M., Dernegard, H., Oja, J., Ormondroyd, G., Medved, S., Sandberg, D. & Jones, D., 17 Nov 2023, In: Materials. 16, 22, 19 p., 7201.

    Research output: Contribution to journal › Article › peer-review

  42. Published

    Percussion Nd:YAG Laser-incision of Radiata Pine: Effects of Laser Processing Parameters and Wood Anatomy

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Curling, S., Pitman, A. & Mason, P., Jun 2022, In: Lasers in Manufacturing and Materials Processing. 9, 2, p. 173-192

    Research output: Contribution to journal › Article › peer-review

  43. Published

    Plants and architecture: the role of biology and biomimetics in materials development for buildings

    Raghavalu Thirumalai, D., Spear, M., Curling, S., Ormondroyd, G., Wootton-Beard, P. C., Donnison, I. & Jones, P., 2019, In: Intelligent Buildings International. 11, 3-4, p. 178-211

    Research output: Contribution to journal › Article › peer-review

  44. Published

    Review of Functional Treatments For Modified Wood

    Spear, M., Curling, S., Dimitriou, A. & Ormondroyd, G., 12 Mar 2021, In: Coatings. 11, 3, 29 p., 327.

    Research output: Contribution to journal › Article › peer-review

  45. Published

    The Viscoelastic Behaviour of Waterlogged Archaeological Wood Treated with Methyltrimethoxysilane

    Broda, M., Spear, M., Curling, S. & Ormondroyd, G., 8 Sept 2021, In: Materials. 14, 18, 20 p.

    Research output: Contribution to journal › Article › peer-review

  46. Published

    The decay resistance of anhydride-modified Corsican pine exposed to the brown rot fungus Coniophora puteana

    Hill, C. A., Hale, M. D., Ormondroyd, G. A., Kwon, J. H. & Forster, S. C., 1 Nov 2006, In: Holzforschung. 60, 6, p. 625-629

    Research output: Contribution to journal › Article › peer-review

  47. Published

    The effect of the changes in chemical composition due to thermal treatment on the mechanical properties of Pinus densiflora

    Peng, Q., Spear, M., Ormondroyd, G. & Chang, W., 5 Dec 2022, In: Construction and Building Materials. 358, 129303.

    Research output: Contribution to journal › Article › peer-review

  48. Published

    The effect on panel properties of incorporation of reject paper fibre into MDF panels

    Curling, S., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 165-170 6 p.

    Research output: Contribution to journal › Article › peer-review

  49. Published

    The environmental and social impacts of modified wood production: effect of timber sourcing

    Roberts, G., Skinner, C. & Ormondroyd, G., 2 Oct 2022, In: International Wood Products Journal. 13, 4, p. 236-254 19 p.

    Research output: Contribution to journal › Article › peer-review

  50. Published

    The water vapour sorption behaviour of acetylated birch wood: how acetylation affects the sorption isotherm and accessible hydroxyl content

    Popescu, C. M., Hill, C. A., Curling, S. F., Ormondroyd, G. A. & Xie, Y., 1 Mar 2014, In: Journal of Materials Science. 49, 5, p. 2362-2371

    Research output: Contribution to journal › Article › peer-review

  51. Published

    The water vapour sorption characteristics and kinetics of different wool types

    Ormondroyd, G., Curling, S., Mansour, E. & Hill, C., 2017, In: Journal of the Textile Institute. 108, 7, p. 1198-1210

    Research output: Contribution to journal › Article › peer-review

  52. Published

    VOC emissions from the combustion of low-grade lignocellulosic waste

    Dimitriou, A., Roberts, P. & Ormondroyd, G., Oct 2018, In: International Wood Products Journal.

    Research output: Contribution to journal › Article › peer-review

  53. Published

    Water sorption, surface structure and surface energy characteristics of wood composite fibres refined at different pressures

    Ormondroyd, G. A., Källbom, S. K., Curling, S. F., Stefanowski, B. K., Segerholm, B. K., Wålinder, M. E. & Jones, D., 19 Feb 2016, In: Wood Material Science and Engineering. 12, 4, p. 203-210

    Research output: Contribution to journal › Article › peer-review

  54. Published

    What is the role of the accessibility of wood hydroxyl groups in controlling moisture content?

    Rautkari, L., Hill, C. A., Curling, S. F., Jalaludin, Z. & Ormondroyd, G. A., 1 Sept 2013, In: Journal of Materials Science. 48, 18, p. 6352-6356

    Research output: Contribution to journal › Article › peer-review

  55. Published

    Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., Feb 2023, In: European Journal of Wood and Wood Products. 81, 1, p. 5-19

    Research output: Contribution to journal › Article › peer-review

  56. Editorial › Research › Not peer-reviewed
  57. Published

    Guest Editorial

    Spear, M. (ed.) & Ormondroyd, G. (ed.), May 2012, In: International Wood Products Journal. 3, 1, p. 1 1 p.

    Research output: Contribution to journal › Editorial

  58. Published

    Guest Editorial

    Spear, M. (ed.) & Ormondroyd, G. (ed.), 3 Sept 2014, In: International Wood Products Journal. 5, 3, p. 129 1 p.

    Research output: Contribution to journal › Editorial

  59. Chapter › Research › Not peer-reviewed
  60. Published

    Adhesives for wood composites

    Ormondroyd, G. A. & Ansell, M. P. (ed.), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 47-66

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  61. Published

    Chemical composition of natural fibres

    Ormondroyd, G. & Curling, S., 12 Oct 2016, Advanced High Strength Natural Fibre Composites in Construction. Fan, M. & Fu, F. (eds.). 1 ed. Cambridge, UK: Woodhead Publishing Ltd, p. 23-58 35 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  62. Published

    Fibreboards and their applications

    Stefanowski, B. K., Ormondroyd, G. A., Stefanowski, B. & Ansell, M. P. (ed.), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 91-102

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  63. Published

    Moisture Interactions of wool and wool-based composites

    Curling, S. & Ormondroyd, G., 5 Aug 2022, Wool Fiber Reinforced Polymer Composites. 1 ed. Oxford, United Kingdom : Woodhead Publishing Ltd, Vol. 1. p. 319 - 330 11 p. (The Textile Institute Book Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  64. Published

    Non-wood bio-based materials: Wool

    Ormondroyd, G. & Mansour, E., 2017, Performance of Bio-based building materials . 1 ed. Cambridge,UK: Woodhead Publishing Ltd, p. 128-141 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  65. Published

    Performance of buildings: Indoor air quality

    Stefanowski, B., Curling, S. & Ormondroyd, G., 21 Jul 2017, Performance of biobased building materials. Jones, D. & Brischke, C. (eds.). 1st Edition ed. Duxford, UK: Woodhead Publishing Ltd, p. 351-365

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  66. Published

    The Opportunities and Challenges for Re-use and Recycling of Timber and Wood Products Within the Construction Sector

    Ormondroyd, G. A., Spear, M. J. & Skinner, C. J., 22 Mar 2016, Environmental Impacts of Traditional and Innovative Forest-based Bioproducts; Environmental Footprints and Eco-design of Products and Processes. Muthu, S. S. & Kutnar, A. (eds.). Springer, p. 45-103 59 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  67. Published

    Wood as a biobased building material: Wood plastic composites.

    Ormondroyd, G. & Kers, J., 2017, Performance of Bio-based building materials . 1 ed. Cambridge: Woodhead Publishing Ltd, p. 61-67 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  68. Chapter › Research › Peer-reviewed
  69. Published

    ASSESSMENT AND MONITORING OF AESTHETIC APPEARANCE OF BUILDING BIOMATERIALS DURING THE SERVICE LIFE

    Sandak, A., Sandak, J., Dimitriou, A., Burud, I., Thiis, T., Gobakken, L. R., Ormondroyd, G. A. & Kraniotis, D., 2018, SUSTAINABLE DEVELOPMENT AND PLANNING IX. Vol. 226. p. 527-536 (WIT Transactions on Ecology and the Environment).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  70. Conference contribution › Research › Not peer-reviewed
  71. Published

    Adding value to UK grown timber by CLT production: A KTP project

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Adding value to UK grown timber in construction: a challenging opportunity in a future market

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Effects of Methyl Methacrylate impregnation on durability of timber.

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Emissions from bio-based building products

    Clauder, L., Ormondroyd, G., Mansour, E. & Pfriem, A., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia, p. 1-2 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species

    Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Implications of synergistic durability relationships on design of construction elements.

    Curling, S. & Ormondroyd, G., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia: European Cooperation in Science and Technology (COST), p. 17-18 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Insights into stability of glued joints between thermally modified timber: adaptation of an artificial weathering test

    Spear, M., Teciu, R. & Ormondroyd, G., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Physical properties and durability of methacrylate impregnated timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 28 Sept 2017, Proceedings of the 13th Annual Northern European Network for Wood Science and Engineering Conference. Copenhagen: Univeristy Of Copenhagen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Conference contribution › Research › Peer-reviewed
  80. Published

    An Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials

    Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  81. Published

    Assessment and monitoring of aesthetic appearance of building biomaterials along the service life

    Ormondroyd, G. & Dimitriou, A., 2017, Proceedings of Timber Structures 2017. p. 1 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  82. Published

    Broadband dielectric measurement & simulation of e-field curing systems

    Parker, N., Cuenca, J., Gumbleton, R., Dimitriou, A., Ormondroyd, G. & Slocombe, D., 26 Jun 2018, Timber 2018 . Spear, M. (ed.). London, p. 89-98 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  83. Published

    COMPUTER MODEL FOR THE SIMULATION OF RELATIVE HUMIDITY OF AN INDOOR ENVIRONMENT

    Raghavalu Thirumalai, D., Spear, M., Curling, S. & Ormondroyd, G., Oct 2018, Proceedings of 29th Inter-American Congress of Chemical Engineering incorporating the 68th Canadian Chemical Engineering Conference. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  84. Published

    Mechanical Characterisation of Green Sandwich Panels – Biomaterial Skins and Natural Fibre Cores

    Raghavalu Thirumalai, D., A. Nassir, N., Ormondroyd, G. & Zhongwei, G., 16 Nov 2017, English.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  85. Published

    Mild thermal modification to add value to UK grown larch: monitoring quality, physical properties and benefits

    Spear, M., Dimitriou, A., Binding, T. & Ormondroyd, G., 10 Mar 2016, Forest Resource and Products: Moving Toward a Sustainable Future .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  86. Published

    Potential effects of climate change on durability of timber and wood based building materials

    Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018 . Spear, M. (ed.). p. 193-200 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  87. Published

    SIMULATION MODEL TO EVALUATE HUMAN COMFORT FACTORS FOR AN OFFICE IN A BUILDING

    Raghavalu Thirumalai, D., Curling, S., Spear, M. & Ormondroyd, G., 24 Aug 2018, MDPI AG Proceedings Journal. Vol. 2(15). p. 1126 4 p. https://doi.org/10.3390/proceedings2151126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  88. Published

    Simulation of flexural stresses on layered natural fibre/epoxy composite beams

    Raghavalu Thirumalai, D., Ormondroyd, G. & Zhongwei, G., 1 Jul 2018, PROCEEDINGS OF THE 4th BRAZILIAN CONFERENCE ON COMPOSITE MATERIALS. July 2018, p. 898-906 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  89. Paper › Research › Not peer-reviewed
  90. Published

    A Protocol for the Sampling of Recycled Wood and the Resulting Chipboard for Contaminant Analysis.

    Ormondroyd, G. A., Fru, C., Irle, M., Maher, K. & Ormondroyd, G., 8 Oct 2003, p. T1-T4.

    Research output: Contribution to conference › Paper

  91. Published

    A Sampling Protocol for the Determination of Contaminant Levels in Wood Raw Materials and Finished Board Products.

    Ormondroyd, G. A., Irle, M. & Ormondroyd, G., 9 Oct 2002, p. 154-158.

    Research output: Contribution to conference › Paper

  92. Published

    Absorption of Formaldehyde by different wool types

    Mansour, E., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 285-288.

    Research output: Contribution to conference › Paper

  93. Published

    Applicability of wood durability testing methods to bio-based building materials

    Curling, S. F., Stefanowski, B. K., Mansour, E. & Ormondroyd, G. A., 10 May 2015.

    Research output: Contribution to conference › Paper

  94. Published

    Biobased and Bioinspired materials for a modern building design - a research perspective

    Spear, M. J., Raghavalu Thirumalai, D. P., Durai Prabhakaran, R. T., Ormondroyd, G. A., Curling, S. F. & Spear, M., 7 Oct 2015, p. 293-296.

    Research output: Contribution to conference › Paper

  95. Published

    Biogenic carbon: its joint roles in bioenergy and carbon sequestration

    Spear, M., Norton, A., Hill, C., Raghavalu Thirumalai, D. & Ormondroyd, G., 6 Sept 2018, p. 53. 1 p.

    Research output: Contribution to conference › Paper

  96. Published

    Challenges in Drying Resin Modified Wood

    Pitman, A., Stefanowski, B., Spear, M., Dimitriou, A., Curling, S., Kupfernagel, C. & Ormondroyd, G., 5 Jul 2022, p. 33. 1 p.

    Research output: Contribution to conference › Paper

  97. Published

    Changes in Cell Wall Volume due to Reaction of Wood with Acetic Anhydride

    Hill, C. A., Kwon, J. H. & Ormondroyd, G. A., 16 Oct 2007.

    Research output: Contribution to conference › Paper

  98. Published
  99. Published

    Comparison of accelerated weathering and field exposed resin modified timber

    Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.

    Research output: Contribution to conference › Paper

  100. Published

    Development of a laboratory testing concept for whole bio-based wall components against fungal colonization

    Stefanowski, B. K., Curling, S. F., Stefanowski, B., Mansour, E. & Ormondroyd, G. A., 4 Mar 2015.

    Research output: Contribution to conference › Paper

  101. Published
  102. Published
  103. Published

    Effect of bio-resin from cashew nut shell liquid (CNSL) on wood decay resistance

    Tverezovskiy, V., Ashaduzzaman, M., Hale, M. D., Tverezovskiy, V. V. & Ormondroyd, G. A., 20 Jun 2013.

    Research output: Contribution to conference › Paper

  104. Published

    Effect on panel properties following incorporation of reject paper fibre into MDF at a pilot scale

    Stefanowski, B. K., Laflin, N. J., Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 22 May 2013.

    Research output: Contribution to conference › Paper

  105. Published

    Effects of Methyl Methacrylate impregnation on physical properties of timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.

    Research output: Contribution to conference › Paper

  106. Published

    Effects of Process Variables on Wood Modification with PF Resin

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 5 Jul 2022, p. 29-31. 3 p.

    Research output: Contribution to conference › Paper

  107. Published

    Effects of climate change on biomineralization in a commercial shellfish species, Mytilus edulis L.

    Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 13 Mar 2013.

    Research output: Contribution to conference › Paper

  108. Published

    Effects on panel properties following incorporation of reject paper fibre into MDF

    Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 10 Oct 2013.

    Research output: Contribution to conference › Paper

  109. Published

    Effekt von Prozessvariablen bei Holzmodifikation mit PF-Harz

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 7 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

  110. Published

    Emissions from bio-based building products

    Clauder, L., Mansour, E., Ormondroyd, G. A. & Pfriem, A., 26 Oct 2015.

    Research output: Contribution to conference › Paper

  111. Published

    Evaluating the optimization of wood modification with polybutylene succinate bio-polyester

    Spear, M. J., Noel, M., Ormondroyd, G. A., Grigsby, W. & Volkmer, T., 26 Oct 2015.

    Research output: Contribution to conference › Paper

  112. Published

    Evaluation of differences in thermal modification as a result of depth profiling. Preliminary investigations into material treated using the Firmolin process

    Segerholm, K., Jones, D., Rautkari, L., Olsson, S., Ormondroyd, G. A., Mansour, E., Leung, G. & Willems, W., 26 Oct 2015.

    Research output: Contribution to conference › Paper

  113. Published

    Evaluation of the mechanical properties of cross laminated bamboo panels by digital image correlation and finite element modeling

    Archila, H. F., Brandon, D., Ansell, M. P., Walker, P. & Ormondroyd, G. A., 13 Aug 2014.

    Research output: Contribution to conference › Paper

  114. Published

    Introduction of the COST FP 1303 Cooperative Performance Test

    Humar, M., Brischke, C., Meyer, L., Lesar, B., Thaler, N., Jones, D., Bardage, S., Belloncle, C., Van den Bulcke, J., Abascal, J. M., Alfredsen, G., Baisch, D., Brunnhuber, B., Cofta, G., Grodås, E., Frühwald Hansson, E., Irle, M., Kallakas, H., Kers, J., Klamer, M., Larsson Brelid, P., Maider, A. B., Mahnert, K. C., Melcher, E., Möller, R., Noël, M., Nunes, L., Ormondroyd, G. A., Palanti, S., Pfabigan, N., Pilgård, A., Rapp, A. O., Schumacher, P., Suttie, E., Teppand, T., Touza, M. & Van Acker, J., 14 May 2015.

    Research output: Contribution to conference › Paper

  115. Published
  116. Published

    Laser incision of wood for the modification of liquid impregnation

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 3 Jul 2019, p. 55-67. 13 p.

    Research output: Contribution to conference › Paper

  117. Published

    Life cycle assessment of a novel tannin-boron association for wood protection

    Hu, J. B., Skinner, C., Ormondroyd, G. A., Pizzi, G. T. & Thevenon, M. F., 25 Aug 2015.

    Research output: Contribution to conference › Paper

  118. Published

    Madera modificada: un futuro robusto para la utilización de la madera

    Ormondroyd, G. A., 30 Sept 2011.

    Research output: Contribution to conference › Paper

  119. Published

    Mild thermal modification to enhance the machinability of larch

    Spear, M. J., Binding, T., Jenkins, D., Nicholls, J. & Ormondroyd, G. A., 10 Mar 2014.

    Research output: Contribution to conference › Paper

  120. Published

    Model study to compare drying rate through laser incisions in beech wood

    Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.

    Research output: Contribution to conference › Paper

  121. Published

    Oil Heat Treatment of Timber for Reduced Hygroscopicity

    Spear, M. J., Spear, M., Fleurentdidier, V., Stefanowski, B. & Ormondroyd, G. A., 7 Sept 2012.

    Research output: Contribution to conference › Paper

  122. Published

    Phenol Formaldehyde Resin Treatment of End Grain Cobbles for Flooring and Paving Applications

    Spear, M., Jones, D., Miles, C. & Ormondroyd, G., 25 Apr 2022, p. 407-414. 8 p.

    Research output: Contribution to conference › Paper

  123. Published

    Physical properties of UK grown larch subjected to mild and moderate thermal modification processes

    Spear, M., Binding, T., Nicholls, J., Jenkins, D. & Ormondroyd, G., 14 Sept 2015.

    Research output: Contribution to conference › Paper

  124. Published

    Properties of LIGNIA modified wood

    Stefanowski, B. K., Spear, M., Curling, S., Pitman, A., Bailey, R., Mathias, J., Evans, N., Ayala, L., Theobald, T. & Ormondroyd, G., 9 Sept 2020, p. 177-188. 12 p.

    Research output: Contribution to conference › Paper

  125. Published
  126. Published

    Scale up of mild thermal modification for cladding and joinery products

    Spear, M., Curling, S. & Ormondroyd, G., 3 Jul 2019, p. 113-117. 5 p.

    Research output: Contribution to conference › Paper

  127. Published

    Surface energy characteristics of fibres refined at different pressures

    Källbom, S., Ormondroyd, G. A., Segerholm, B. K., Jones, D. & Wålinder, M. E., 17 Sept 2014.

    Research output: Contribution to conference › Paper

  128. Published

    The Effect of Material Fatigue on Differently Modified Wood

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 25 Apr 2022, p. 292-300. 9 p.

    Research output: Contribution to conference › Paper

  129. Published

    The Measurement of Contaminants in Recycled Wood and Products made from Recycled Wood.

    Ormondroyd, G. A., Irle, M., Fru, C., Maher, K. & Ormondroyd, G., 8 Oct 2003, p. 208-218.

    Research output: Contribution to conference › Paper

  130. Published

    The decay resistance of anhydride modified wood: A study of the mechanisms.

    Ormondroyd, G. A., Hill, C. A. & Ormondroyd, G., 6 Oct 2005.

    Research output: Contribution to conference › Paper

  131. Published

    The effects of fatigue cycling on acetylated, thermally treated and PF-modified Scots pine

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 9 Sept 2020, p. 153-164. 12 p.

    Research output: Contribution to conference › Paper

  132. Published

    The role of hydroxyl groups in determining the sorption p roperties of modified wood

    Rautkari, L., Curling, S. F., Ormondroyd, G. A., Xie, Y. & Jalaludin, Z., 11 Mar 2014.

    Research output: Contribution to conference › Paper

  133. Published

    The sorption of Volatile Organic Compounds (VOCS) by modified MDF panels and effects on mould colonisation and growth

    Stefanowski, B. K., Stefanowski, B., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 175-184.

    Research output: Contribution to conference › Paper

  134. Published

    What new can the COST FP1006 Round Robin test provide to our knowledge on wood weathering?

    Cowley, C. D., Sandak, J., Sandak, A., Fellin, M., Riggio, M., Burud, I., Gobakken, L. R., Csiha, C., Bak, M., Róbert, N., Noël, M., Can, A., Sivrikaya, H., Marszall, A., Orlem, A. P., Meija-Feldmane, A., Andersons, B., Cowley, C., Ormondroyd, G. A., Mòdol, E. C., Papadopoulou, E., Tondi, G., Militz, H., Heinze, P., Wuijtens, I., Modzelewska, I., Arnold, M., Delucis, R. A., Diaz, R. H., Kärki, T. & Mottonen, V., 9 Apr 2015.

    Research output: Contribution to conference › Paper

  135. Published

    Wood Composites in Modern Methods of Construction: applications and environmental considerations

    Jones, D., Ormondroyd, G. A., Lawther, M. & Tweed, C., 6 Oct 2011.

    Research output: Contribution to conference › Paper

  136. Published

    Wood Modification with Phenol Formaldehyde Resin and its Influence on the Dimensional Stability of Homegrown and Imported Hardwoods

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 14 Oct 2021, p. 12-15. 4 p.

    Research output: Contribution to conference › Paper

  137. Published

    Wood based panels in modern methods of construction for housing: greenhouse gas abatement analysis

    Spear, M., Norton, A., Hill, C., Price, C. & Ormondroyd, G., 8 Oct 2019, p. 95-108. 14 p.

    Research output: Contribution to conference › Paper

  138. Paper › Research › Peer-reviewed
  139. Published

    Development of a laboratory testing concept for whole bio- based wall components against fungal colonisation.

    Curling, S., Ormondroyd, G., Mansour, E. & Stefanowski, B., 2015.

    Research output: Contribution to conference › Paper › peer-review

  140. Published

    Knowledge Transfer Partnership. Adding value to UK grown timber in construction

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.

    Research output: Contribution to conference › Paper › peer-review

  141. Published

    Natural insulation fibres for the absorption of indoor volatile organic compounds

    Ormondroyd, G., Curling, S., Mansour, E. & Marriott, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

  142. Published

    Sheep wool insulation for the absorption of volatile organic compounds

    Mansour, E., Marriott, R. & Ormondroyd, G., 12 Apr 2016.

    Research output: Contribution to conference › Paper › peer-review

  143. Published

    Simulation of RF fields for wood gluing applications

    Parker, N., Cuenca, J., Dimitriou, A., Ormondroyd, G. & Slocombe, D., 21 Sept 2017.

    Research output: Contribution to conference › Paper › peer-review

  144. Published

    The role of hydroxyl groups in determining the sorption properties of modified wood

    Hill, C., Curling, S. & Ormondroyd, G., 2014.

    Research output: Contribution to conference › Paper › peer-review

  145. Poster › Research › Not peer-reviewed
  146. Published
  147. Published

    Use of DMA to Evaluate the Modification of Tropical Hardwood Timbers by Cashew Nut Shell Liquid (CNSL) Resin

    Spear, M., Ashaduzzaman, M., Ormondroyd, G. & Hale, M., 25 Apr 2022, p. 142-145. 4 p.

    Research output: Contribution to conference › Poster

  148. Poster › Research › Peer-reviewed
  149. Published

    Laser Incision of woods: effects on liquid penetration

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 14 Oct 2018. 9 p.

    Research output: Contribution to conference › Poster › peer-review

  150. Abstract › Research › Peer-reviewed
  151. Published

    FLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION

    Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  152. Book › Research › Not peer-reviewed
  153. Published

    Designing with Natural Materials

    Ormondroyd, G. (ed.), 5 Sept 2018, CRC Press. 352 p.

    Research output: Book/Report › Book

  154. Commissioned report › Research › Not peer-reviewed
  155. Published

    Carbon footprint assessment of the North Wales and Mersey Dee economic area

    Ormondroyd, G. & Skinner, C., 6 Jun 2019, 37 p.

    Research output: Book/Report › Commissioned report

  156. Published

    Science to Policy: Nature-based solutions for the built environment

    Wiik, E., Ormondroyd, G., Spear, M., Curling, S., Raghavalu Thirumalai Prabhakaran, D., Donnison, I., Robson, P., Bosch, M., Wootton-Beard, P. C., Hindhaugh, R., Jones, P., Waldron, D., Xing, Y. & Toberman, H., Mar 2019, Ser Cymru National Research Network for Low Carbon, Energy and Environment. (Science to Policy)

    Research output: Book/Report › Commissioned report

  157. Commissioned report › Research › Peer-reviewed
  158. Published

    Wood in Construction in the UK: An Analysis of Carbon Abatement Potential. Extended Summary. Published as an annex to the Committee on Climate Change report "Biomass in a low-carbon economy".

    Spear, M., Hill, C., Norton, A., Price, C. & Ormondroyd, G., 18 Jul 2019, Committee on Climate Change. 28 p.

    Research output: Book/Report › Commissioned report › peer-review

  159. Review article › Research › Peer-reviewed
  160. Published

    Gap-Fillers for Wooden Artefacts Exposed Outdoors—A Review

    Broda, M., Kryg, P. & Ormondroyd, G. A., 12 May 2021, In: Forests. 12, 5, e606.

    Research output: Contribution to journal › Review article › peer-review