Dr Morwenna Spear

Research Fellow

Affiliations

  1. Article › Research › Peer-reviewed
  2. Published

    An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity

    Hughes, M., Sebe, G., Hague, J., Hill, C., Spear, M. & Mott, L., 2 Apr 2000, In: Composite Interfaces. 7, 1, p. 13-29

    Research output: Contribution to journalArticlepeer-review

  3. Published

    Assessment of the use of dynamic mechanical analysis to investigate initial onset of brown rot decay of Scots pine (Pinus sylvestris L.)

    Ormondroyd, G., Alfredsen, G., Raghavalu Thirumalai, D., Curling, S., Stefanowski, B., Spear, M. & Gobakken, L. R., May 2017, In: International Biodeterioration and Biodegradation. 120, p. 1-5 5 p.

    Research output: Contribution to journalArticlepeer-review

  4. Published

    British and Irish newspapers implicitly support single-use masks over reusable face coverings

    Auge, A., Tenbrink, T., Spear, M. & Abrams, N., Oct 2023, In: Frontiers in Communication. 8, 15 p., 1256349.

    Research output: Contribution to journalArticlepeer-review

  5. Published

    CO2 laser interactions with wood tissues during single pulse laser-incision

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    Comparison of Contemporary Elm (Ulmus spp.) and degraded Archaeological Elm: the use of dynamic mechanical analysis under ambient moisture conditions

    Spear, M. & Broda, M., 7 Nov 2020, In: Materials. 13, 21, 5026.

    Research output: Contribution to journalArticlepeer-review

  7. Published

    Dynamic mechanical analysis of Scots pine and three tropical hardwoods

    Ashaduzzaman, M., Hale, M., Ormondroyd, G. & Spear, M., Oct 2020, In: International Wood Products Journal. 11, 4, p. 189-203

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Effect of methyltrimethoxysilane impregnation on the cell wall porosity and water vapour sorption of archaeological waterlogged oak

    Broda, M., Curling, S., Spear, M. & Hill, C., May 2019, In: Wood Science and Technology.

    Research output: Contribution to journalArticlepeer-review

  9. Published

    Effects of Biological and Chemical Degradation on the Properties of Scots Pine—Part II: Wood-Moisture Relations and Viscoelastic Behaviour

    Broda, M., Spear, M., Curling, S. & Dimitriou, A., 31 Aug 2022, In: Forests. 13, 9, 1390.

    Research output: Contribution to journalArticlepeer-review

  10. Published

    Exploring Design Principles of Biological and Living Building Envelopes: What Can We Learn from Plant Cell Walls?

    Xing, Y., Bosch, M., Spear, M., Donnison, I., Ormondroyd, G. & Jones, P., 2018, In: Intelligent Buildings International. 10, 2, p. 78-102

    Research output: Contribution to journalArticlepeer-review

  11. Published

    Influence of water and humidity on chemically modifying wood with polybutylene succinate bio-polyester

    Noel, M., Grigsby, W. J., Ormondroyd, G. & Spear, M., Jun 2016, In: International Wood Products Journal. 7, 2, p. 80-88

    Research output: Contribution to journalArticlepeer-review

  12. Published

    Laser incising of wood: A Review

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.

    Research output: Contribution to journalArticlepeer-review

  13. Published

    Modified wood: review of efficacy and service life testing

    Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203

    Research output: Contribution to journalArticlepeer-review

  14. Published

    Percussion Nd:YAG Laser-incision of Radiata Pine: Effects of Laser Processing Parameters and Wood Anatomy

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Curling, S., Pitman, A. & Mason, P., Jun 2022, In: Lasers in Manufacturing and Materials Processing. 9, 2, p. 173-192

    Research output: Contribution to journalArticlepeer-review

  15. Published

    Plants and architecture: the role of biology and biomimetics in materials development for buildings

    Raghavalu Thirumalai, D., Spear, M., Curling, S., Ormondroyd, G., Wootton-Beard, P. C., Donnison, I. & Jones, P., 2019, In: Intelligent Buildings International. 11, 3-4, p. 178-211

    Research output: Contribution to journalArticlepeer-review

  16. Published

    Review of Functional Treatments For Modified Wood

    Spear, M., Curling, S., Dimitriou, A. & Ormondroyd, G., 12 Mar 2021, In: Coatings. 11, 3, 29 p., 327.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    The Viscoelastic Behaviour of Waterlogged Archaeological Wood Treated with Methyltrimethoxysilane

    Broda, M., Spear, M., Curling, S. & Ormondroyd, G., 8 Sept 2021, In: Materials. 14, 18, 20 p.

    Research output: Contribution to journalArticlepeer-review

  18. Published

    The effect of four methods of surface activation for improved adhesion of wood polymer composites (WPCs)

    Dimitriou, A., Hale, M. & Spear, M., Jul 2016, In: International Journal of Adhesion and Adhesives. 68, July, p. 188-194

    Research output: Contribution to journalArticlepeer-review

  19. Published

    The effect of pH on surface activation of wood polymer composites (WPCs) with hydrogen peroxide for improved adhesion

    Dimitriou, A., Hale, M. & Spear, M., Oct 2018, In: International Journal of Adhesion and Adhesives. 85, October, p. 44-57 14 p.

    Research output: Contribution to journalArticlepeer-review

  20. Published

    The effect of the changes in chemical composition due to thermal treatment on the mechanical properties of Pinus densiflora

    Peng, Q., Spear, M., Ormondroyd, G. & Chang, W., 5 Dec 2022, In: Construction and Building Materials. 358, 129303.

    Research output: Contribution to journalArticlepeer-review

  21. Published

    Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., Feb 2023, In: European Journal of Wood and Wood Products. 81, 1, p. 5-19

    Research output: Contribution to journalArticlepeer-review

  22. Editorial › Research › Not peer-reviewed
  23. Published

    Guest Editorial

    Spear, M. (ed.) & Ormondroyd, G. (ed.), May 2012, In: International Wood Products Journal. 3, 1, p. 1 1 p.

    Research output: Contribution to journalEditorial

  24. Published

    Guest Editorial

    Spear, M. (ed.) & Ormondroyd, G. (ed.), 3 Sept 2014, In: International Wood Products Journal. 5, 3, p. 129 1 p.

    Research output: Contribution to journalEditorial

  25. Chapter › Research › Not peer-reviewed
  26. Published

    Dimensional instability in timber

    Spear, M. & Walker, J. C. F., 6 Sept 2006, Primary Wood Processing: Principles and Practice. 2nd ed. Springer, p. 95-120

    Research output: Chapter in Book/Report/Conference proceedingChapter

  27. Published

    Emerging nature based materials and their use in new products

    Spear, M., 25 Sept 2018, Designing with natural materials. Ormondroyd, G. & Morris, A. (eds.). CRC Press, p. 217-321 104 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  28. Published

    Natural Materials – Composition and Combinations

    Spear, M., 25 Sept 2018, Designing with natural materials. Ormondroyd, G. & Morris, A. (eds.). CRC Press, p. 29-110 82 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  29. Published

    Preservation, protection and modification of wood composites

    Spear, M. J., 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 253-310

    Research output: Chapter in Book/Report/Conference proceedingChapter

  30. Published

    The Opportunities and Challenges for Re-use and Recycling of Timber and Wood Products Within the Construction Sector

    Ormondroyd, G. A., Spear, M. J. & Skinner, C. J., 22 Mar 2016, Environmental Impacts of Traditional and Innovative Forest-based Bioproducts; Environmental Footprints and Eco-design of Products and Processes. Muthu, S. S. & Kutnar, A. (eds.). Springer, p. 45-103 59 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  31. Published

    Wood polymer composites

    Spear, M. J., Eder, A. & Carus, M., 1 Aug 2015, Wood Composites. Ansell, M. P. (ed.). 2015 ed. Woodhead Publishing Ltd, p. 195-249

    Research output: Chapter in Book/Report/Conference proceedingChapter

  32. Chapter › Research › Peer-reviewed
  33. Published

    A conceptual methodology for estimating stored sequestered carbon in the built environment

    Spear, M., Hill, C. & Price, C., Jan 2021, Smart Innovation, Systems and Technologies, Vol 23, Sustainability and energy in buildings 2020. Littlewood, J. (ed.). Vol. 23. p. 381-393 12 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterpeer-review

  34. Conference contribution › Research › Not peer-reviewed
  35. Published

    Adding value to UK grown timber by CLT production: A KTP project

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Published

    Adding value to UK grown timber in construction: a challenging opportunity in a future market

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Published

    Communication of Uncertainty in Spatial Data to Decision Makers

    Spear, M., Hall, J. & Wadsworth, R. A., 21 May 1996, Proceedings of Spatial Accuracy Assessment in Natural Resources and Environmental Sciences: Second International Symposium.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Published

    Dynamic mechanical thermal analysis of wood modified with bio-polyesters

    Grosse, C., Spear, M., Curling, S., Noel, M., Rautkari, L., Uimonen, T. & Gerardin, P., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Published

    Effects of Artificial UV weathering and soft rot decay on heat treated wood

    Hale, M., Ghosh, S. C. & Spear, M., 24 Apr 2005, International Research Group on Wood Protection: Working Papers. 13 p. IRG/WP 05-40302

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Published

    Effects of Methyl Methacrylate impregnation on durability of timber.

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. Published

    Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species

    Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Published

    Hot Oil and Resin Treated Timber: Resistance to Decay by Brown Rot Fungi

    Spear, M., Fowler, P., Hill, C. & Elias, R., 20 Sept 2006, Proceedings of ECOWOOD2006, 2nd International Conference on Environmentally-Compatible Forest Products. Fernando Pessoa University, Porto, 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Published

    Insights into stability of glued joints between thermally modified timber: adaptation of an artificial weathering test

    Spear, M., Teciu, R. & Ormondroyd, G., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Published

    Natural Fibre Reinforced Polypropylene Composites: Assessing the Potential of Hemp and TMP Fibre

    Spear, M., Hill, C. & Tomkinson, J., 9 Oct 2002, Proceedings of the 6th European Panel Products Symposium.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. Published

    Physical properties and durability of methacrylate impregnated timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 28 Sept 2017, Proceedings of the 13th Annual Northern European Network for Wood Science and Engineering Conference. Copenhagen: Univeristy Of Copenhagen

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Published

    Properties of wood following treatment with a modified hot oil

    Jones, D., Tjeerdsma, B., Spear, M. & Hill, C., 6 Oct 2005, Proceedings of the 2nd European Conference on Wood Modification. Militz, H. & Hill, C. (eds.). Goettingen, Germany, p. 202-207 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Published

    Review of the use of PF and related resins for modification of solid wood

    Stefanowski, B., Spear, M. & Pitman, A., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 165-179 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Published

    Transcrystalline Interphases in Polypropylene Composites: Exploring the Possibilities

    Spear, M., Hill, C. & Tomkinson, J., 19 May 2005, Proceedings of the 7th International Conference on Woodfiber-Plastic Composites (and other natural fibers). Madison, WI: Forest Products Society, p. 49-57 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Published

    Wood Plastic Composites: surface modification with heat to improve the adhesion ability

    Dimitriou, A., Spear, M. & Hale, M., 7 Sept 2015, Advances in modified and functional bio-based surfaces, Proceedings of COST Action FP1006.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  50. Conference contribution › Research › Peer-reviewed
  51. Published

    An Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials

    Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  52. Published

    COMPUTER MODEL FOR THE SIMULATION OF RELATIVE HUMIDITY OF AN INDOOR ENVIRONMENT

    Raghavalu Thirumalai, D., Spear, M., Curling, S. & Ormondroyd, G., Oct 2018, Proceedings of 29th Inter-American Congress of Chemical Engineering incorporating the 68th Canadian Chemical Engineering Conference. 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  53. Published

    Mild thermal modification to add value to UK grown larch: monitoring quality, physical properties and benefits

    Spear, M., Dimitriou, A., Binding, T. & Ormondroyd, G., 10 Mar 2016, Forest Resource and Products: Moving Toward a Sustainable Future .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  54. Published

    SIMULATION MODEL TO EVALUATE HUMAN COMFORT FACTORS FOR AN OFFICE IN A BUILDING

    Raghavalu Thirumalai, D., Curling, S., Spear, M. & Ormondroyd, G., 24 Aug 2018, MDPI AG Proceedings Journal. Vol. 2(15). p. 1126 4 p. https://doi.org/10.3390/proceedings2151126

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  55. Paper › Research › Not peer-reviewed
  56. Published

    A study of miscanthus straw for composites: microscopy and fibre analysis

    Turner, W., Robson, P., Bosch, M. & Spear, M., 5 Oct 2017, p. 171-173. 3 p.

    Research output: Contribution to conferencePaper

  57. Published

    Biobased and Bioinspired materials for a modern building design - a research perspective

    Spear, M. J., Raghavalu Thirumalai, D. P., Durai Prabhakaran, R. T., Ormondroyd, G. A., Curling, S. F. & Spear, M., 7 Oct 2015, p. 293-296.

    Research output: Contribution to conferencePaper

  58. Published

    Biogenic carbon: its joint roles in bioenergy and carbon sequestration

    Spear, M., Norton, A., Hill, C., Raghavalu Thirumalai, D. & Ormondroyd, G., 6 Sept 2018, p. 53. 1 p.

    Research output: Contribution to conferencePaper

  59. Published

    Challenges in Drying Resin Modified Wood

    Pitman, A., Stefanowski, B., Spear, M., Dimitriou, A., Curling, S., Kupfernagel, C. & Ormondroyd, G., 5 Jul 2022, p. 33. 1 p.

    Research output: Contribution to conferencePaper

  60. Published
  61. Published

    Comparison of accelerated weathering and field exposed resin modified timber

    Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.

    Research output: Contribution to conferencePaper

  62. Published

    Considering timber as biogenic carbon: the built environment and carbon sequestration

    Spear, M., Hill, C., Norton, A. & Price, C., 26 Jun 2018, p. 67-68. 2 p.

    Research output: Contribution to conferencePaper

  63. Published

    Demonstrating the suitability of laser incision for timber treatment technologies

    Spear, M., Miles, C., Williams, E., Mason, P., Williams, G., Pitman, A., Bailey, R., Theobald, T., Nath, S. & Waugh, D., 14 Oct 2021, p. 101-103. 3 p.

    Research output: Contribution to conferencePaper

  64. Published

    Effects of Methyl Methacrylate impregnation on physical properties of timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.

    Research output: Contribution to conferencePaper

  65. Published

    Effects of Process Variables on Wood Modification with PF Resin

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 5 Jul 2022, p. 29-31. 3 p.

    Research output: Contribution to conferencePaper

  66. Published

    Effekt von Prozessvariablen bei Holzmodifikation mit PF-Harz

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 7 Apr 2022. 2 p.

    Research output: Contribution to conferencePaper

  67. Published

    Evaluating the optimization of wood modification with polybutylene succinate bio-polyester

    Spear, M. J., Noel, M., Ormondroyd, G. A., Grigsby, W. & Volkmer, T., 26 Oct 2015.

    Research output: Contribution to conferencePaper

  68. Published

    Laser incision of wood for the modification of liquid impregnation

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 3 Jul 2019, p. 55-67. 13 p.

    Research output: Contribution to conferencePaper

  69. Published

    Mild thermal modification to enhance the machinability of larch

    Spear, M. J., Binding, T., Jenkins, D., Nicholls, J. & Ormondroyd, G. A., 10 Mar 2014.

    Research output: Contribution to conferencePaper

  70. Published

    Model study to compare drying rate through laser incisions in beech wood

    Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.

    Research output: Contribution to conferencePaper

  71. Published

    Moisture control in oil and bioresin heat treated timber.

    Spear, M. J., Fowler, P. A., Hill, C. A., Hale, M. D., Jones, D. (ed.), Militz, H. (ed.) & Ormondroyd, G. A. (ed.), 1 Jan 2007, p. 147-151.

    Research output: Contribution to conferencePaper

  72. Published

    Oil Heat Treatment of Timber for Reduced Hygroscopicity

    Spear, M. J., Spear, M., Fleurentdidier, V., Stefanowski, B. & Ormondroyd, G. A., 7 Sept 2012.

    Research output: Contribution to conferencePaper

  73. Published

    Paving the way: the potential for phenol formaldehyde resin treatment for durable end-grain cobbles

    Spear, M. & Jones, D., 9 Sept 2020, p. 165-176. 12 p.

    Research output: Contribution to conferencePaper

  74. Published

    Phenol Formaldehyde Resin Treatment of End Grain Cobbles for Flooring and Paving Applications

    Spear, M., Jones, D., Miles, C. & Ormondroyd, G., 25 Apr 2022, p. 407-414. 8 p.

    Research output: Contribution to conferencePaper

  75. Published

    Physical properties of UK grown larch subjected to mild and moderate thermal modification processes

    Spear, M., Binding, T., Nicholls, J., Jenkins, D. & Ormondroyd, G., 14 Sept 2015.

    Research output: Contribution to conferencePaper

  76. Published

    Properties of LIGNIA modified wood

    Stefanowski, B. K., Spear, M., Curling, S., Pitman, A., Bailey, R., Mathias, J., Evans, N., Ayala, L., Theobald, T. & Ormondroyd, G., 9 Sept 2020, p. 177-188. 12 p.

    Research output: Contribution to conferencePaper

  77. Published

    Scale up of mild thermal modification for cladding and joinery products

    Spear, M., Curling, S. & Ormondroyd, G., 3 Jul 2019, p. 113-117. 5 p.

    Research output: Contribution to conferencePaper

  78. Published

    The Effect of Material Fatigue on Differently Modified Wood

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 25 Apr 2022, p. 292-300. 9 p.

    Research output: Contribution to conferencePaper

  79. Published

    The effects of fatigue cycling on acetylated, thermally treated and PF-modified Scots pine

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 9 Sept 2020, p. 153-164. 12 p.

    Research output: Contribution to conferencePaper

  80. Published
  81. Published

    Wood Modification with Phenol Formaldehyde Resin and its Influence on the Dimensional Stability of Homegrown and Imported Hardwoods

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 14 Oct 2021, p. 12-15. 4 p.

    Research output: Contribution to conferencePaper

  82. Published

    Wood based panels in modern methods of construction for housing: greenhouse gas abatement analysis

    Spear, M., Norton, A., Hill, C., Price, C. & Ormondroyd, G., 8 Oct 2019, p. 95-108. 14 p.

    Research output: Contribution to conferencePaper

  83. Paper › Research › Peer-reviewed
  84. Published

    Knowledge Transfer Partnership. Adding value to UK grown timber in construction

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.

    Research output: Contribution to conferencePaperpeer-review

  85. Poster › Research › Not peer-reviewed
  86. Published

    Use of DMA to Evaluate the Modification of Tropical Hardwood Timbers by Cashew Nut Shell Liquid (CNSL) Resin

    Spear, M., Ashaduzzaman, M., Ormondroyd, G. & Hale, M., 25 Apr 2022, p. 142-145. 4 p.

    Research output: Contribution to conferencePoster

  87. Poster › Research › Peer-reviewed
  88. Published

    Laser Incision of woods: effects on liquid penetration

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 14 Oct 2018. 9 p.

    Research output: Contribution to conferencePosterpeer-review

  89. Abstract › Research › Peer-reviewed
  90. Published

    FLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION

    Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.

    Research output: Contribution to conferenceAbstractpeer-review

  91. Commissioned report › Research › Not peer-reviewed
  92. Published

    Assessment of the Envelope Effect of Three Hot Oil Treatments: Resistance to Decay by Coniophora puteana and Postia placenta.

    Spear, M. J., Hill, C. A., Curling, S. F., Jones, D. & Hale, M. D., 1 Jan 2006, 2006 ed. Unknown.

    Research output: Book/ReportCommissioned report

  93. Published

    Science to Policy: Nature-based solutions for the built environment

    Wiik, E., Ormondroyd, G., Spear, M., Curling, S., Raghavalu Thirumalai Prabhakaran, D., Donnison, I., Robson, P., Bosch, M., Wootton-Beard, P. C., Hindhaugh, R., Jones, P., Waldron, D., Xing, Y. & Toberman, H., Mar 2019, Ser Cymru National Research Network for Low Carbon, Energy and Environment. (Science to Policy)

    Research output: Book/ReportCommissioned report

  94. Commissioned report › Research › Peer-reviewed
  95. Published

    Wood in Construction in the UK: An Analysis of Carbon Abatement Potential. Extended Summary. Published as an annex to the Committee on Climate Change report "Biomass in a low-carbon economy".

    Spear, M., Hill, C., Norton, A., Price, C. & Ormondroyd, G., 18 Jul 2019, Committee on Climate Change. 28 p.

    Research output: Book/ReportCommissioned reportpeer-review