1. Published

   An investigation on the possible use of coffee silverskin in PLA/PBS composites

   Aghaye Ghazvini, A. K., Curling, S., Ormondroyd, G., Saccani, A. & Sisti, L., 10 Jun 2022, In: Journal of Applied Polymer Science. 139, 22, 10 p., 52264.

   Research output: Contribution to journal › Article › peer-review

2. Published

   The effect of the drying method on the cell wall structure and sorption properties of waterlogged archaeological wood

   Broda, M., Curling, S. & Frankowski, M., Jul 2021, In: Wood Science and Technology. 55, 4, p. 971-989 19 p.

   Research output: Contribution to journal › Article › peer-review

3. Published

   Effects of Biological and Chemical Degradation on the Properties of Scots ine Wood—Part I: Chemical Composition and Microstructure of the CellWall

   Broda, M., Popescu, C. M., Curling, S., Timpu, D. I. & Ormondroyd, G., 22 Mar 2022, In: Materials. 15, 7, 15 p.

   Research output: Contribution to journal › Article › peer-review

4. Published

   Effects of Biological and Chemical Degradation on the Properties of Scots Pine Wood-Part I: Chemical Composition and Microstructure of the Cell Wall

   Broda, M., Popescu, C-M., Curling, S. F., Timpu, D. I. & Ormondroyd, G. A., 22 Mar 2022, In: Materials. 15, 7

   Research output: Contribution to journal › Article › peer-review

5. Published

   Effects of Biological and Chemical Degradation on the Properties of Scots Pine—Part II: Wood-Moisture Relations and Viscoelastic Behaviour

   Broda, M., Spear, M., Curling, S. & Dimitriou, A., 31 Aug 2022, In: Forests. 13, 9, 1390.

   Research output: Contribution to journal › Article › peer-review

6. Published

   The Viscoelastic Behaviour of Waterlogged Archaeological Wood Treated with Methyltrimethoxysilane

   Broda, M., Spear, M., Curling, S. & Ormondroyd, G., 8 Sept 2021, In: Materials. 14, 18, 20 p.

   Research output: Contribution to journal › Article › peer-review

7. Published

   Effect of methyltrimethoxysilane impregnation on the cell wall porosity and water vapour sorption of archaeological waterlogged oak

   Broda, M., Curling, S., Spear, M. & Hill, C., May 2019, In: Wood Science and Technology.

   Research output: Contribution to journal › Article › peer-review

8. Published

   The kinetics of water vapour sorption: analysis using parallel exponential kinetics model on six malaysian hardwoods.

   Curling, S. F., Zaihan, J., Hill, C. A., Curling, S., Hashim, W. S. & Hamdan, H., 1 Apr 2010, In: Journal of Tropical Forest Science. 22, 2, p. 107-117

   Research output: Contribution to journal › Article › peer-review

9. Published

   Analysis of the water vapour sorption isotherms of thermally modified acacia and sesendok.

   Curling, S. F., Jalaludin, Z., Hill, C. A., Xie, Y., Samsi, H. W., Husain, H., Awang, K. & Curling S.F., N. V., 1 Sept 2010, In: Wood Material Science and Engineering. 5, 3, p. 1748-0280

   Research output: Contribution to journal › Article › peer-review

10. Published

    Comparison of the effects of gamma irradiation and steam sterilization on southern pine sapwood.

    Curling, S. F., Curling, S. & Winandy, J. E., 1 Jan 2008, In: Forest Products Journal. 58, 1-2, p. 87-90

    Research output: Contribution to journal › Article › peer-review

11. Published

    Applicability of wood durability testing methods to bio-based building materials

    Curling, S. F., Stefanowski, B. K., Mansour, E. & Ormondroyd, G. A., 10 May 2015.

    Research output: Contribution to conference › Paper

12. Published

    Effects on panel properties following incorporation of reject paper fibre into MDF

    Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 10 Oct 2013.

    Research output: Contribution to conference › Paper

13. Published

    A rapid method for investigating the absorption of formaldehyde from air by wool

    Curling, S. F., Loxton, C. & Ormondroyd, G. A., 1 Apr 2012, In: Journal of Materials Science. 47, 7, p. 3248-3251

    Research output: Contribution to journal › Article › peer-review

14. Published

    Development of a method for the production of hemicellulosic gels from Sitka spruce.

    Curling, S. F., Fowler, P. A. & Hill, C. A., 2 Jul 2007, In: Carbohydrate Polymers. 69, 4, p. 673-677

    Research output: Contribution to journal › Article › peer-review

15. Published

    Physical properties and durability of methacrylate impregnated timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 28 Sept 2017, Proceedings of the 13th Annual Northern European Network for Wood Science and Engineering Conference. Copenhagen: Univeristy Of Copenhagen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

16. Published

    Moisture Interactions of wool and wool-based composites

    Curling, S. & Ormondroyd, G., 5 Aug 2022, Wool Fiber Reinforced Polymer Composites. 1 ed. Oxford, United Kingdom : Woodhead Publishing Ltd, Vol. 1. p. 319 - 330 11 p. (The Textile Institute Book Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

17. Published

    Potential effects of climate change on durability of timber and wood based building materials

    Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018 . Spear, M. (ed.). p. 193-200 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

18. Published

    Laboratory test to determine the effect on durability of combining biobased building materials with timber in construction

    Curling, S. & Ormondroyd, G., 4 Jun 2017. 10 p.

    Research output: Contribution to conference › Paper

19. Published

    The effect on panel properties of incorporation of reject paper fibre into MDF panels

    Curling, S., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 165-170 6 p.

    Research output: Contribution to journal › Article › peer-review

20. Published

    Observed and projected changes in the climate based decay hazard of timber in the United Kingdom

    Curling, S. & Ormondroyd, G., 1 Oct 2020, In: Scientific Reports. 10, 8 p., 16287 (2020).

    Research output: Contribution to journal › Article › peer-review

21. Published

    Wood as a biobased building material - Panels

    Curling, S. & Kers, J., 21 Jul 2017, Performance of biobased building materials. Jones, D. & Brischke, C. (eds.). 1st ed. Duxford, UK: Woodhead Publishing Ltd, p. 52-61

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

22. Published

    Effects of Methyl Methacrylate impregnation on durability of timber.

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

23. Published

    Implications of synergistic durability relationships on design of construction elements.

    Curling, S. & Ormondroyd, G., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia: European Cooperation in Science and Technology (COST), p. 17-18 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

24. Published

    Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products

    Curling, S., Jones, D., Ormondroyd, G. & Williams, A., 2017, In: Arab Gulf Journal of Scientific Research. 34, 2/3

    Research output: Contribution to journal › Article › peer-review

25. Published

    Feasibility of using straw in a strong, thin, pulp moulded packaging material

    Curling, S., Laflin, N., Davies, G., Ormondroyd, G. & Elias, R., Mar 2017, In: Industrial Crops and Products. 97, p. 395-400

    Research output: Contribution to journal › Article › peer-review

26. Published

    Development of a laboratory testing concept for whole bio- based wall components against fungal colonisation.

    Curling, S., Ormondroyd, G., Mansour, E. & Stefanowski, B., 2015.

    Research output: Contribution to conference › Paper › peer-review

27. Published

    Does combining biobased building materials with timber based construction elements have an effect on biological durability?

    Curling, S., Stefanowski, B. & Ormondroyd, G., 15 Jun 2018.

    Research output: Contribution to conference › Paper

28. Published

    Effects of Methyl Methacrylate impregnation on physical properties of timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.

    Research output: Contribution to conference › Paper

29. Published

    Test methods for Biobased building materials

    Curling, S., 21 Jul 2017, Performance of Biobased building materials. Jones, D. & Brischke, C. (eds.). 1st ed. Duxford, United Kingdom: Woodhead Publishing Ltd, p. 385-481 (Civil and Structural Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

30. Published

    Knowledge Transfer Partnership. Adding value to UK grown timber in construction

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.

    Research output: Contribution to conference › Paper › peer-review

31. Published

    Adding value to UK grown timber in construction: a challenging opportunity in a future market

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

32. Published

    Adding value to UK grown timber by CLT production: A KTP project

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

33. Published

    On the effect of heat on the chemical composition and dimensions of thermally-modified wood.

    Gonzalez-Pena, M. M., Curling, S. F. & Hale, M. D., 1 Dec 2009, In: Polymer Degradation and Stability. 94, 12, p. 2184-2193

    Research output: Contribution to journal › Article › peer-review

34. Published

    Dynamic mechanical thermal analysis of wood modified with bio-polyesters

    Grosse, C., Spear, M., Curling, S., Noel, M., Rautkari, L., Uimonen, T. & Gerardin, P., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

35. Published

    Decay resistance of acetylated and hexanoylated hardwood and softwood species exposed to Coniophora puteana.

    Hill, C. A., Curling, S. F., Kwon, J. H. & Marty, V., 1 Aug 2009, In: Holzforschung. 63, 5, p. 619-625

    Research output: Contribution to journal › Article › peer-review

36. Published

    The role of hydroxyl groups in determining the sorption properties of modified wood

    Hill, C., Curling, S. & Ormondroyd, G., 2014.

    Research output: Contribution to conference › Paper › peer-review

37. Published

    Evaluation of the Effect of a Combined Chemical and Thermal Modification of Wood though the Use of Bicine and Tricine

    Jones, D., Krzisnik, D., Hocevar, M., Zagar, A., Humar, M., Popescu, C-M., Popescu, M-C., Brischke, C., Nunes, L., Curling, S., Ormondroyd, G. & Sandberg, D., Jun 2022, In: Forests. 13, 6

    Research output: Contribution to journal › Article › peer-review

38. Published

    The effects of fatigue cycling on acetylated, thermally treated and PF-modified Scots pine

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 9 Sept 2020, p. 153-164. 12 p.

    Research output: Contribution to conference › Paper

39. Published

    The Effect of Material Fatigue on Differently Modified Wood

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 25 Apr 2022, p. 292-300. 9 p.

    Research output: Contribution to conference › Paper

40. Published

    Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products

    Lahmer, R. A., Morris, A., Curling, S., Ormondroyd, G., Jones, D. & Williams, A., May 2016, In: Assiut Journal of Agricultural Sciences (AJAS). 47, 2, p. 24-28

    Research output: Contribution to journal › Article › peer-review

41. Published

    Physicochemical characterization of cellulose from perennial ryegrass leaves (Lolium perenne)

    Liu, C. F., Xu, F., Sun, J. X., Ren, J. L., Curling, S. F., Sun, R., Fowler, P. A. & Baird, M. S., 27 Nov 2006, In: Carbohydrate Research. 341, 16, p. 2677-2687

    Research output: Contribution to journal › Article › peer-review

42. Published

    Ocean Warming, More than Acidification, Reduces Shell Strength in a Commercial Shellfish Species during Food Limitation

    Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 28 Jan 2014, In: PLoS ONE. 9, 1, p. e86764

    Research output: Contribution to journal › Article › peer-review

43. Published

    Absorption of Volatile Organic Compounds by Different Wool Types

    Mansour, E., Curling, S. F., Stéphan, A. & Ormondroyd, G. A., Mar 2016, In: Green Materials. 4, 1

    Research output: Contribution to journal › Article › peer-review

44. Published

    Absorption of Formaldehyde by different wool types

    Mansour, E., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 285-288.

    Research output: Contribution to conference › Paper

45. Published

    Laser incising of wood: A Review

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.

    Research output: Contribution to journal › Article › peer-review

46. Published

    Percussion Nd:YAG Laser-incision of Radiata Pine: Effects of Laser Processing Parameters and Wood Anatomy

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Curling, S., Pitman, A. & Mason, P., Jun 2022, In: Lasers in Manufacturing and Materials Processing. 9, 2, p. 173-192

    Research output: Contribution to journal › Article › peer-review

47. Published

    CO2 laser interactions with wood tissues during single pulse laser-incision

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.

    Research output: Contribution to journal › Article › peer-review

48. Published

    Modified wood: review of efficacy and service life testing

    Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203

    Research output: Contribution to journal › Article › peer-review

49. Published

    Water sorption, surface structure and surface energy characteristics of wood composite fibres refined at different pressures

    Ormondroyd, G. A., Källbom, S. K., Curling, S. F., Stefanowski, B. K., Segerholm, B. K., Wålinder, M. E. & Jones, D., 19 Feb 2016, In: Wood Material Science and Engineering. 12, 4, p. 203-210

    Research output: Contribution to journal › Article › peer-review

50. Published

    An Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials

    Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review