StandardStandard

A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels. / Agius, Dylan; Kareer, Anna; Mamun, Abdullah et al.
Yn: International journal of plasticity, Cyfrol 152, 103249, 01.05.2022.

Allbwn ymchwil: Cyfraniad at gyfnodolynErthygladolygiad gan gymheiriaid

HarvardHarvard

Agius, D, Kareer, A, Mamun, A, Truman, C, Collins, DM, Mostafavi, M & Knowles, D 2022, 'A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels', International journal of plasticity, cyfrol. 152, 103249. https://doi.org/10.1016/j.ijplas.2022.103249

APA

Agius, D., Kareer, A., Mamun, A., Truman, C., Collins, D. M., Mostafavi, M., & Knowles, D. (2022). A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels. International journal of plasticity, 152, Erthygl 103249. https://doi.org/10.1016/j.ijplas.2022.103249

CBE

Agius D, Kareer A, Mamun A, Truman C, Collins DM, Mostafavi M, Knowles D. 2022. A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels. International journal of plasticity. 152:Article 103249. https://doi.org/10.1016/j.ijplas.2022.103249

MLA

VancouverVancouver

Agius D, Kareer A, Mamun A, Truman C, Collins DM, Mostafavi M et al. A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels. International journal of plasticity. 2022 Mai 1;152:103249. Epub 2022 Chw 3. doi: 10.1016/j.ijplas.2022.103249

Author

Agius, Dylan ; Kareer, Anna ; Mamun, Abdullah et al. / A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels. Yn: International journal of plasticity. 2022 ; Cyfrol 152.

RIS

TY - JOUR

T1 - A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels

AU - Agius, Dylan

AU - Kareer, Anna

AU - Mamun, Abdullah

AU - Truman, Christopher

AU - Collins, David M.

AU - Mostafavi, Mahmoud

AU - Knowles, David

N1 - The authors would like to thank the support from EDF Energy and the Engineering and Physical Sciences Research Council [EP/R020108/1 and EP/R030537/1].

PY - 2022/5/1

Y1 - 2022/5/1

N2 - To ensure a more representative simulation of meso‑scale and macro-scale deformation, it is important the underlying constitutive relations are advanced to more effectively incorporate the micro-mechanisms such as those operative near the grain boundaries. Critical features necessary for accurate predictions include the influence of grain size, morphology, and misorientation on the local deformation. In this study, a length scale dependence is incorporated into classical crystal plasticity simulations. The implementation is based on the influence of dislocation slip pile-up at grain boundaries based on the Hall-Petch theory in materials. This was achieved by applying a purpose-built algorithm to extract the slip distance in adjacent grains along each slip direction. This extracted data was used to adjust the critical resolved shear stress within the grain. The adjusted slip law was then implemented in constitutive models to predict the yield stress and hardening evolution of material for different grain sizes. The interaction of the slip systems between grains was also considered, which resulted in the adjustment in the extent of slip transfer permitted between grains based on misorientation. The proposed approach can be applied in both finite element and spectral methods for solving the continuum differential equations. The accuracy of the proposed model was investigated by considering the meso‑scale predictions using two-dimensional simulations, in addition to macro-scale predictions using three-dimensional models. Furthermore, the validity of the method was experimentally supported by tracking the development of intragranular residual elastic stresses, measured via high-resolution electron backscatter diffraction. The discussed results highlight a new potential of enhancing the way in which complex grain boundary interactions contribute to local deformation in crystal plasticity simulations.

AB - To ensure a more representative simulation of meso‑scale and macro-scale deformation, it is important the underlying constitutive relations are advanced to more effectively incorporate the micro-mechanisms such as those operative near the grain boundaries. Critical features necessary for accurate predictions include the influence of grain size, morphology, and misorientation on the local deformation. In this study, a length scale dependence is incorporated into classical crystal plasticity simulations. The implementation is based on the influence of dislocation slip pile-up at grain boundaries based on the Hall-Petch theory in materials. This was achieved by applying a purpose-built algorithm to extract the slip distance in adjacent grains along each slip direction. This extracted data was used to adjust the critical resolved shear stress within the grain. The adjusted slip law was then implemented in constitutive models to predict the yield stress and hardening evolution of material for different grain sizes. The interaction of the slip systems between grains was also considered, which resulted in the adjustment in the extent of slip transfer permitted between grains based on misorientation. The proposed approach can be applied in both finite element and spectral methods for solving the continuum differential equations. The accuracy of the proposed model was investigated by considering the meso‑scale predictions using two-dimensional simulations, in addition to macro-scale predictions using three-dimensional models. Furthermore, the validity of the method was experimentally supported by tracking the development of intragranular residual elastic stresses, measured via high-resolution electron backscatter diffraction. The discussed results highlight a new potential of enhancing the way in which complex grain boundary interactions contribute to local deformation in crystal plasticity simulations.

KW - Crystal plasticity

KW - FFT

KW - Grain boundary

KW - Grain size effect

KW - Slip distance

KW - Slip transfer

U2 - 10.1016/j.ijplas.2022.103249

DO - 10.1016/j.ijplas.2022.103249

M3 - Article

VL - 152

JO - International journal of plasticity

JF - International journal of plasticity

SN - 0749-6419

M1 - 103249

ER -