Melt infiltration into porous media is an intriguing phenomenon that holds immense significance across various sciences and technologies. In this work, the problem of metallic melt infiltration in particulate beds is investigated for understanding and prediction of severe accident progression associated with a molten pool penetrating through an underlying debris bed which may form in the reactor core or in the lower head of a light water reactor.
The present study aims to quantify the effect of particle surface’s wettability on melt infiltration kinetics. For this purpose, two categories of experiment are conceived and carried out to measure the wettability of different material surfaces by melt and to characterize melt infiltration kinetics in one-dimensional particulate beds, respectively. The melt material is tin–bismuth eutectic alloy with a melting point of 139 °C. Copper (Cu), stainless steel (SS), Tin (Sn) and tin-coated stainless steel (Sn-coated SS) are chosen as materials of substrates and particles in wettability measurement and melt infiltration study. The particulate beds, packed with 1.5 mm spheres, are preheated to 200 °C before the melt infiltration begins.
The experimental data of wettability measurement shows that the contact angles of liquid Sn-Bi eutectic on the above-mentioned material surfaces range from 79° to 135°. The results of melt infiltration tests confirm the significant effect of wettability on melt penetration kinetics. The capillary force plays a significant role in the initial infiltration of particulate beds. Specifically, a wettable particulate bed enhances the initial melt infiltration, whereas non-wettable beds hinder it.