Porth Ymchwil

Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics

Allbwn ymchwil: Cyfraniad at gyfnodolyn › Erthygl › adolygiad gan gymheiriaid

StandardStandard

Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics. / Kettle, J.P.; Bristow, N.D.; Kettle, J. et al.
Yn: Solar Energy Materials and Solar Cells, Cyfrol 144, 23.10.2015, t. 481-487.

Allbwn ymchwil: Cyfraniad at gyfnodolyn › Erthygl › adolygiad gan gymheiriaid

HarvardHarvard

Kettle, JP, Bristow, ND, Kettle, J, Bristow, N, Gethin, DT, Tehrani, Z, Moudam, O, Li, B, Katz, EA, dos Reis Benatto, GA & Krebs, FC 2015, 'Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics', Solar Energy Materials and Solar Cells, cyfrol. 144, tt. 481-487. https://doi.org/10.1016/j.solmat.2015.09.037

APA

Kettle, J. P., Bristow, N. D., Kettle, J., Bristow, N., Gethin, D. T., Tehrani, Z., Moudam, O., Li, B., Katz, E. A., dos Reis Benatto, G. A., & Krebs, F. C. (2015). Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics. Solar Energy Materials and Solar Cells, 144, 481-487. https://doi.org/10.1016/j.solmat.2015.09.037

CBE

Kettle JP, Bristow ND, Kettle J, Bristow N, Gethin DT, Tehrani Z, Moudam O, Li B, Katz EA, dos Reis Benatto GA, et al. 2015. Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics. Solar Energy Materials and Solar Cells. 144:481-487. https://doi.org/10.1016/j.solmat.2015.09.037

MLA

Kettle, J.P. et al. "Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics". Solar Energy Materials and Solar Cells. 2015, 144. 481-487. https://doi.org/10.1016/j.solmat.2015.09.037

VancouverVancouver

Kettle JP, Bristow ND, Kettle J, Bristow N, Gethin DT, Tehrani Z et al. Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics. Solar Energy Materials and Solar Cells. 2015 Hyd 23;144:481-487. doi: 10.1016/j.solmat.2015.09.037

Author

Kettle, J.P. ; Bristow, N.D. ; Kettle, J. et al. / Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics. Yn: Solar Energy Materials and Solar Cells. 2015 ; Cyfrol 144. tt. 481-487.

RIS

TY - JOUR

T1 - Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics

AU - Kettle, J.P.

AU - Bristow, N.D.

AU - Kettle, J.

AU - Bristow, N.

AU - Gethin, D.T.

AU - Tehrani, Z.

AU - Moudam, O.

AU - Li, B.

AU - Katz, E.A.

AU - dos Reis Benatto, G.A.

AU - Krebs, F.C.

PY - 2015/10/23

Y1 - 2015/10/23

N2 - The proof of concept of using luminescent down shifting (LDS) layers as alternative UV filters for P3HT:PCBM OPVs is demonstrated using a lanthanide-based metal complex. The results are verified using a combination of indoor light soaking, with single cell devices, and outdoor performance monitoring, using a 16-cell monolithically connected OPV module. By applying the LDS layer, a ~5% relative enhancement in photocurrent is observed for both sets of devices. More significantly, indoor light soaking tests on single cell devices without encapsulation showed an 850% enhancement in the measured half-life (T50%). The OPV modules were encapsulated and tested for outdoor stability over a 70 day period in the Negev desert, Israel. The modules made with the LDS filter are shown to match the stability of those made with a commercial UV filter and outperform the modules with no filter applied, with a 51% enhancement in the measured stability (T75%). Significantly, the work provides clear experimental evidence that the LDS layer can act as a UV filter in OPVs without compromising the efficiency of the solar cell, thus providing an added benefit over commercial UV filters.

AB - The proof of concept of using luminescent down shifting (LDS) layers as alternative UV filters for P3HT:PCBM OPVs is demonstrated using a lanthanide-based metal complex. The results are verified using a combination of indoor light soaking, with single cell devices, and outdoor performance monitoring, using a 16-cell monolithically connected OPV module. By applying the LDS layer, a ~5% relative enhancement in photocurrent is observed for both sets of devices. More significantly, indoor light soaking tests on single cell devices without encapsulation showed an 850% enhancement in the measured half-life (T50%). The OPV modules were encapsulated and tested for outdoor stability over a 70 day period in the Negev desert, Israel. The modules made with the LDS filter are shown to match the stability of those made with a commercial UV filter and outperform the modules with no filter applied, with a 51% enhancement in the measured stability (T75%). Significantly, the work provides clear experimental evidence that the LDS layer can act as a UV filter in OPVs without compromising the efficiency of the solar cell, thus providing an added benefit over commercial UV filters.

U2 - 10.1016/j.solmat.2015.09.037

DO - 10.1016/j.solmat.2015.09.037

M3 - Article

VL - 144

SP - 481

EP - 487

JO - Solar Energy Materials and Solar Cells

JF - Solar Energy Materials and Solar Cells

SN - 0927-0248

ER -