Deposits of sediment gravity flows in the Aberystwyth Grits Group (Silurian, west Wales, United Kingdom) display evidence that sole marks are suitable for reconstructing depositional processes and environments in deep-marine sedimentary successions. Based on drone imagery, 3D laser scanning, high-resolution sedimentary logging, and detailed descriptions of sole marks, a 1600-m long outcrop between the villages of Aberarth and Llannon was subdivided into seven lithological units, representing: (a) mudstone-poor, coarse-grained and thick-bedded submarine channel fills, dominated by the deposits of erosive high-density turbidity currents with flute marks; (b) mudstone-rich levee deposits with thin-bedded, fine-grained sandstones formed by low-density turbidity currents that scoured the bed to form flute marks; (c) channel-lobe transition zone deposits, dominated by thick beds, formed by weakly erosive, coarse-grained hybrid events, with pronounced mudstone-rich or sandstone-dominated debritic divisions and groove marks below basal turbiditic divisions, and with subordinate amounts of turbidites and debris flow deposits; (d) tabular, medium- to thick-bedded turbiditic sandstones with flute marks and mixed sandstone–mudstone hybrid event beds mainly with groove marks, interpreted as submarine lobe axis (or off-axis) deposits; and (e) tabular, thin- to medium-bedded, fine-grained, mainly turbiditic sandstones mostly with flute marks, formed in a lobe fringe environment. Both lobe environments also comprised turbidites with low-amplitude bed-waves and large ripples, which are interpreted to represent transient-turbulent flows. The strong relationship between flute marks and turbidites agrees with earlier predictions that turbulent shear flows are essential for the formation of flute marks. Moreover, the observation as part of this study that debris flow deposits are exclusively associated with groove marks signifies that clay-charged, laminar flows are carriers for tools that are in continuous contact with the bed. A new process model for hybrid event beds, informed by the dominance of tool marks, in particular grooves, below the basal sand division (H1 division of Haughton et al. 2009, Marine and Petroleum Geology, v. 26, p. 1900-1918) and by the rapid change from turbidites in the channel to hybrid event beds in the channel-lobe transition zone, is proposed. This model incorporates profound erosion of clay in the channel by the head of a high-density turbidity current and subsequent transformation of the head into a debris flow following rapid lateral flow expansion at the mouth of the channel. This debris flow forms the groove marks below the H1 division in hybrid event beds. A temporal increase in cohesivity in the body of the hybrid event is used to explain the generation of the H1, H2 and H3 divisions (sensu Haughton et al. 2009) on top of the groove surfaces, involving a combination of longitudinal segregation of bedload and vertical segregation of suspension load. This study thus demonstrates that sole marks can be an integral part of sedimentological studies at different scales, well beyond their traditional use as paleoflow direction or orientation indicators.