Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications

Allbwn ymchwil: Cyfraniad at gyfnodolynErthygladolygiad gan gymheiriaid

StandardStandard

Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications. / Tehrani, Z.; Korochkina, T.; Govindarajan, S. et al.
Yn: Organic Electronics, Cyfrol 26, Rhif November, 01.11.2015, t. 386-394.

Allbwn ymchwil: Cyfraniad at gyfnodolynErthygladolygiad gan gymheiriaid

HarvardHarvard

Tehrani, Z, Korochkina, T, Govindarajan, S, Thomas, DJ, O'Mahony, JO, Kettle, J, Claypole, TC & Gethin, DT 2015, 'Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications', Organic Electronics, cyfrol. 26, rhif November, tt. 386-394. https://doi.org/10.1016/j.orgel.2015.08.007

APA

Tehrani, Z., Korochkina, T., Govindarajan, S., Thomas, D. J., O'Mahony, J. O., Kettle, J., Claypole, T. C., & Gethin, D. T. (2015). Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications. Organic Electronics, 26(November), 386-394. https://doi.org/10.1016/j.orgel.2015.08.007

CBE

Tehrani Z, Korochkina T, Govindarajan S, Thomas DJ, O'Mahony JO, Kettle J, Claypole TC, Gethin DT. 2015. Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications. Organic Electronics. 26(November):386-394. https://doi.org/10.1016/j.orgel.2015.08.007

MLA

VancouverVancouver

Tehrani Z, Korochkina T, Govindarajan S, Thomas DJ, O'Mahony JO, Kettle J et al. Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications. Organic Electronics. 2015 Tach 1;26(November):386-394. doi: 10.1016/j.orgel.2015.08.007

Author

Tehrani, Z. ; Korochkina, T. ; Govindarajan, S. et al. / Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications. Yn: Organic Electronics. 2015 ; Cyfrol 26, Rhif November. tt. 386-394.

RIS

TY - JOUR

T1 - Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications

AU - Tehrani, Z.

AU - Korochkina, T.

AU - Govindarajan, S.

AU - Thomas, D.J.

AU - O'Mahony, J.O.

AU - Kettle, Jeffrey

AU - Claypole, T.C.

AU - Gethin, D.T.

N1 - The European Regional Development Fund (ERDF) through the Ireland Wales Program INTERREG 4A

PY - 2015/11/1

Y1 - 2015/11/1

N2 - This research has demonstrated how an ultra-thin rechargeable battery technology has been fabricated using screen printing technology. The screen printing process enabled the sequential deposition of current collector, electrode and separator/electrolyte materials onto a polyethylene terephthalate (PET) substrate in order to form both flexible and rechargeable electrodes for a battery application. The anode and cathode fabricated were based on the conducting poly (3,4-ethylenedioxythiophen): poly (styrene sulfonate) (PEDOT: PSS) and polyethyleneimine (PEI) which were combined to form the electrodes. The difference in the oxidation level between the two electrodes produced an open circuit voltage of 0.60 V and displayed a practical specific capacity of 5.5 mAh g−1. The battery developed had an active surface area of 400 mm2 and a device thickness of 440 μm. The chemistry developed during this study displayed long-term cycling potential and proves the stability of the cells for continued usage. This technology has direct uses in future personal wearable electronic devices.

AB - This research has demonstrated how an ultra-thin rechargeable battery technology has been fabricated using screen printing technology. The screen printing process enabled the sequential deposition of current collector, electrode and separator/electrolyte materials onto a polyethylene terephthalate (PET) substrate in order to form both flexible and rechargeable electrodes for a battery application. The anode and cathode fabricated were based on the conducting poly (3,4-ethylenedioxythiophen): poly (styrene sulfonate) (PEDOT: PSS) and polyethyleneimine (PEI) which were combined to form the electrodes. The difference in the oxidation level between the two electrodes produced an open circuit voltage of 0.60 V and displayed a practical specific capacity of 5.5 mAh g−1. The battery developed had an active surface area of 400 mm2 and a device thickness of 440 μm. The chemistry developed during this study displayed long-term cycling potential and proves the stability of the cells for continued usage. This technology has direct uses in future personal wearable electronic devices.

U2 - 10.1016/j.orgel.2015.08.007

DO - 10.1016/j.orgel.2015.08.007

M3 - Article

VL - 26

SP - 386

EP - 394

JO - Organic Electronics

JF - Organic Electronics

SN - 1566-1199

IS - November

ER -