Challenges in Developing a Real-time Bee-counting Radar

Research output: Contribution to journalArticlepeer-review

Standard Standard

Challenges in Developing a Real-time Bee-counting Radar. / Morton Williams, Samuel; Aldabashi, Nawaf; Cross, Paul et al.
In: Sensors, Vol. 23, No. 11, 01.06.2023.

Research output: Contribution to journalArticlepeer-review

HarvardHarvard

APA

CBE

MLA

VancouverVancouver

Morton Williams S, Aldabashi N, Cross P, Palego C. Challenges in Developing a Real-time Bee-counting Radar. Sensors. 2023 Jun 1;23(11). doi: https://doi.org/10.3390/s23115250

Author

Morton Williams, Samuel ; Aldabashi, Nawaf ; Cross, Paul et al. / Challenges in Developing a Real-time Bee-counting Radar. In: Sensors. 2023 ; Vol. 23, No. 11.

RIS

TY - JOUR

T1 - Challenges in Developing a Real-time Bee-counting Radar

AU - Morton Williams, Samuel

AU - Aldabashi, Nawaf

AU - Cross, Paul

AU - Palego, Cristiano

PY - 2023/6/1

Y1 - 2023/6/1

N2 - Detailed within is an attempt to implement a real-time radar signal classification system to monitor and count bee activity at the hive entry. There is interest in keeping records of the productivity of honeybees. Activity at the entrance can be a good measure of overall health and capacity, and a radar-based approach could be cheap, low power, and versatile, beyond other techniques. Fully automated systems would enable simultaneous, large-scale capturing of bee activity patterns from multiple hives, providing vital data for ecological research and business practice improvement. Data from a Doppler radar were gathered from managed beehives on a farm. Recordings were split into 0.4 s windows, and Log Area Ratios (LARs) were computed from the data. Support vector machine models were trained to recognize flight behavior from the LARs, using visual confirmation recorded by a camera. Spectrogram deep learning was also investigated using the same data. Once complete, this process would allow for removing the camera and accurately counting the events by radar-based machine learning alone. Challenging signals from more complex bee flights hindered progress. System accuracy of 70% was achieved, but clutter impacted the overall results requiring intelligent filtering to remove environmental effects from the data.

AB - Detailed within is an attempt to implement a real-time radar signal classification system to monitor and count bee activity at the hive entry. There is interest in keeping records of the productivity of honeybees. Activity at the entrance can be a good measure of overall health and capacity, and a radar-based approach could be cheap, low power, and versatile, beyond other techniques. Fully automated systems would enable simultaneous, large-scale capturing of bee activity patterns from multiple hives, providing vital data for ecological research and business practice improvement. Data from a Doppler radar were gathered from managed beehives on a farm. Recordings were split into 0.4 s windows, and Log Area Ratios (LARs) were computed from the data. Support vector machine models were trained to recognize flight behavior from the LARs, using visual confirmation recorded by a camera. Spectrogram deep learning was also investigated using the same data. Once complete, this process would allow for removing the camera and accurately counting the events by radar-based machine learning alone. Challenging signals from more complex bee flights hindered progress. System accuracy of 70% was achieved, but clutter impacted the overall results requiring intelligent filtering to remove environmental effects from the data.

KW - Animals

KW - Bees

KW - Machine Learning

KW - Radar

KW - Support Vector Machine

KW - Ultrasonography, Doppler

U2 - https://doi.org/10.3390/s23115250

DO - https://doi.org/10.3390/s23115250

M3 - Article

C2 - 37299977

VL - 23

JO - Sensors

JF - Sensors

SN - 1424-8220

IS - 11

ER -