1. Published

   Chemical Composition of Larch Oleoresin before and during Thermal Modification

   Spear, M., Dimitriou, A. & Marriott, R., 23 May 2024, In: Forests. 15, 6, 14 p., 904.

   Research output: Contribution to journal › Article › peer-review

2. Published

   Demonstrating the suitability of laser incision for timber treatment technologies

   Spear, M., Miles, C., Williams, E., Mason, P., Williams, G., Pitman, A., Bailey, R., Theobald, T., Nath, S. & Waugh, D., 14 Oct 2021, p. 101-103. 3 p.

   Research output: Contribution to conference › Paper

3. Published

   Phenol Formaldehyde Resin Treatment of End Grain Cobbles for Flooring and Paving Applications

   Spear, M., Jones, D., Miles, C. & Ormondroyd, G., 25 Apr 2022, p. 407-414. 8 p.

   Research output: Contribution to conference › Paper

4. Published

   Model study to compare drying rate through laser incisions in beech wood

   Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.

   Research output: Contribution to conference › Paper

5. Published

   Wood in Construction in the UK: An Analysis of Carbon Abatement Potential. Extended Summary. Published as an annex to the Committee on Climate Change report "Biomass in a low-carbon economy".

   Spear, M., Hill, C., Norton, A., Price, C. & Ormondroyd, G., 18 Jul 2019, Committee on Climate Change. 28 p.

   Research output: Book/Report › Commissioned report › peer-review

6. Published

   Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species

   Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.

   Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

7. Published

   Comparison of Contemporary Elm (Ulmus spp.) and degraded Archaeological Elm: the use of dynamic mechanical analysis under ambient moisture conditions

   Spear, M. & Broda, M., 7 Nov 2020, In: Materials. 13, 21, 5026.

   Research output: Contribution to journal › Article › peer-review

8. Published

   A conceptual methodology for estimating stored sequestered carbon in the built environment

   Spear, M., Hill, C. & Price, C., Jan 2021, Smart Innovation, Systems and Technologies, Vol 23, Sustainability and energy in buildings 2020. Littlewood, J. (ed.). Vol. 23. p. 381-393 12 p.

   Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

9. Published

   Emerging nature based materials and their use in new products

   Spear, M., 25 Sept 2018, Designing with natural materials. Ormondroyd, G. & Morris, A. (eds.). CRC Press, p. 217-321 104 p.

   Research output: Chapter in Book/Report/Conference proceeding › Chapter

10. Published

    Preservation, protection and modification of wood composites

    Spear, M. J., 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 253-310

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

11. Published

    Development of a rapid screening method to determine the susceptibility to mould growth of novel construction and insulation products

    Stefanowski, B. K., Curling, S. F., Mansour, E. & Ormondroyd, G. A., 10 May 2015.

    Research output: Contribution to conference › Paper

12. Published

    A rapid screening method to determine the susceptibility of bio-based construction and insulation products to mould growth

    Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Jan 2017, In: International Biodeterioration and Biodegradation. p. 124-132 8 p., 116.

    Research output: Contribution to journal › Article › peer-review

13. Published

    Properties of LIGNIA modified wood

    Stefanowski, B. K., Spear, M., Curling, S., Pitman, A., Bailey, R., Mathias, J., Evans, N., Ayala, L., Theobald, T. & Ormondroyd, G., 9 Sept 2020, p. 177-188. 12 p.

    Research output: Contribution to conference › Paper

14. Published

    Comparison of accelerated weathering and field exposed resin modified timber

    Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.

    Research output: Contribution to conference › Paper

15. Published

    Performance of buildings: Indoor air quality

    Stefanowski, B., Curling, S. & Ormondroyd, G., 21 Jul 2017, Performance of biobased building materials. Jones, D. & Brischke, C. (eds.). 1st Edition ed. Duxford, UK: Woodhead Publishing Ltd, p. 351-365

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

16. Published

    Improvement of Indoor Air Quality by MDF panels containing walnut shells

    Stefanowski, B., Ormondroyd, G., Da Silva, C. F., Maskell, D., Ansell, M. P., Dengel, A. & Ball, R. J., Oct 2017, In: Building and Environment. 123, p. 427-436

    Research output: Contribution to journal › Article › peer-review

17. Published

    Development of a laboratory testing concept for whole bio-based wall components against fungal colonization

    Stefanowski, B. K., Curling, S. F., Stefanowski, B., Mansour, E. & Ormondroyd, G. A., 4 Mar 2015.

    Research output: Contribution to conference › Paper

18. Published

    The sorption of Volatile Organic Compounds (VOCS) by modified MDF panels and effects on mould colonisation and growth

    Stefanowski, B. K., Stefanowski, B., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 175-184.

    Research output: Contribution to conference › Paper

19. Published

    Review of the use of PF and related resins for modification of solid wood

    Stefanowski, B., Spear, M. & Pitman, A., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 165-179 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

20. Published

    Assessment of lignocellulosic nut wastes as an absorbent for gaseous formaldehyde

    Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Apr 2017, In: Industrial Crops and Products. 98, April, p. 25-28 4 p.

    Research output: Contribution to journal › Article › peer-review

21. Published

    Evaluating mould colonisation and growth on MDF panels modified to sequester Volatile Organic Compounds

    Stefanowski, B., Ormondroyd, G. & Curling, S., Dec 2016, In: International Wood Products Journal. 7, 4, p. 188-194

    Research output: Contribution to journal › Article › peer-review

22. Published

    Fibreboards and their applications

    Stefanowski, B. K., Ormondroyd, G. A., Stefanowski, B. & Ansell, M. P. (ed.), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 91-102

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

23. Published

    Effect on panel properties following incorporation of reject paper fibre into MDF at a pilot scale

    Stefanowski, B. K., Laflin, N. J., Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 22 May 2013.

    Research output: Contribution to conference › Paper

24. Published

    Lithium stabilization of amorphous ZrO2

    Stephens, G. F., Wilson, J., Curling, S., He, G., Thomas, P. J., Williams, D., Ortner, S., Grovenor, C., Rushton, M., Cole-Baker, A. & Middleburgh, S., 6 May 2024, In: Progress in Nuclear Energy. 171, 105165.

    Research output: Contribution to journal › Article › peer-review

25. Published

    Comparisons of particleboard produced from Acacia hybrid and a UK commercial particleboard furnish from recycled wood.

    Suffian, M., Ormondroyd, G. A. & Hale, M. D., 1 Jan 2010, In: Journal of Tropical Forest Science. 22, 3, p. 227-236

    Research output: Contribution to journal › Article › peer-review