1. Published

   Assessing the potential of steel as a substrate for building integrated photovoltaic applications

   Kettle, J., Hughes, L., Bristow, N., Korochkina, T., Sanchez, P., Gomez, D. & Gethin, D., 1 Nov 2018, In: Applied Energy. 229, p. 209-223

   Research output: Contribution to journal › Article › peer-review

2. Published

   Using ISOS consensus test protocols for development of quantitative life test models in ageing of organic solar cells

   Kettle, J., Stoichkov, V., Kumar, D., Corazza, M., Gevorgyan, S. A. & Krebs, F. C., 1 Aug 2017, In: Solar Energy Materials and Solar Cells. 167, p. 53-59

   Research output: Contribution to journal › Article › peer-review

3. Published

   Three dimensional corrugated organic photovoltaics for building integration; improving the efficiency, oblique angle and diffuse performance of solar cells

   Kettle, J. P., Bristow, N. D., Sweet, T. K., Jenkins, N., dos Reis Benatto, G. A., Jorgensen, M. & Krebs, F. C., 9 Sept 2015, In: Energy and Environmental Science. 8, p. 3266-3273

   Research output: Contribution to journal › Article › peer-review

4. Published

   Cyclopentadithiophene–naphthalenediimide polymers; synthesis, characterisation, and n-type semiconducting properties in field-effect transistors and photovoltaic devices

   Kettle, J. P., Li, C. H., Kettle, J. & Horie, M., 15 Apr 2014, In: Materials Chemistry and Physics. 144, 3, p. 519-528

   Research output: Contribution to journal › Article › peer-review

5. Published

   Fabrication of poly(3-hexylthiophene) self-switching diodes using thermal nanoimprint lithography and argon milling.

   Kettle, J. P., Kettle, J., Whitelegg, S., Song, A. M., Madec, M. B., Yeates, S., Turner, M. L., Kotacka, L. & Kolarik, V., 1 Nov 2009, In: Journal of Vacuum Science and Technology B. 27, 6, p. 2801-2804

   Research output: Contribution to journal › Article › peer-review

6. Published

   Cyclopentadithiophene-benzothiadiazole oligomers and polymers; synthesis, characterisation, field-effect transistor and photovoltaic characteristics

   Kettle, J. P., Horie, M., Kettle, J., Yu, C. Y., Majewski, L. A., Chang, S. W., Kirkpatrick, J., Tuladhar, S. M., Nelson, J., Saunders, B. R. & Turner, M. L., 1 Feb 2012, In: Journal of Materials Chemistry. 22, 2, p. 381-389

   Research output: Contribution to journal › Article › peer-review

7. Published

   Real-time vapour sensing using an OFET-based electronic nose and genetic programming.

   Kettle, J. P., Wedge, D. C., Das, A., Dost, R., Kettle, J., Madec, M. B., Morrison, J. J., Grell, M., Kell, D. B., Richardson, T. H., Yeates, S. & Turner, M. L., 4 Dec 2009, In: Sensors and Actuators B: Chemical. 143, 1, p. 365-372

   Research output: Contribution to journal › Article › peer-review

8. Published

   Overcoming material challenges for replication of "motheye lenses" using step and flash imprint lithography for optoelectronic applications.

   Kettle, J. P., Kettle, J., Hoyle, R. T., Perks, R. M. & Dimov, S., 1 Sept 2008, In: Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. 26, 5, p. 1794-1799

   Research output: Contribution to journal › Article › peer-review

9. Published

   Ready cells for large scale systems

   Kettle, J., Jul 2019, In: Nature energy. 4, 7, p. 536-537

   Research output: Contribution to journal › Editorial › peer-review

10. Published

    XPS Analysis of the chemical degradation of PTB7 polymers for organic photovoltaics

    Kettle, J., Ding, Z., Horie, M. & Smith, G. C., Dec 2016, In: Organic Electronics. 39

    Research output: Contribution to journal › Article › peer-review

11. Published

    Fabrication of complex 3D structures using Step and Flash Imprint Lithography (S-FIL).

    Kettle, J. P., Kettle, J., Hoyle, R. T., Dimov, S. & Perks, R. M., 1 May 2008, In: Microelectronic Engineering. 85, 5-6, p. 853-855

    Research output: Contribution to journal › Article › peer-review

12. Published

    Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics

    Kettle, J. P., Bristow, N. D., Kettle, J., Bristow, N., Gethin, D. T., Tehrani, Z., Moudam, O., Li, B., Katz, E. A., dos Reis Benatto, G. A. & Krebs, F. C., 23 Oct 2015, In: Solar Energy Materials and Solar Cells. 144, p. 481-487

    Research output: Contribution to journal › Article › peer-review

13. Published

    Fabrication of planar organic nanotransitors using low temperature thermal nanoimprint lithography for chemical sensor applications.

    Kettle, J. P., Kettle, J., Whitelegg, S., Song, A. M., Wedge, D. C., Kotacka, L., Kolarik, V., Madec, M. B., Yeates, S. G. & Turner, M. L., 19 Feb 2010, In: Nanotechnology. 21, 7, p. 075301

    Research output: Contribution to journal › Article › peer-review

14. Published

    Development of multidye UV filters for OPVs using luminescent materials

    Kettle, J., Fernandes, R. V., Bristow, N., Stoichkov, V., Anizelli, H. S., Duarte, J. L. & Laureto, E., 18 Jan 2017, In: Journal of Physics D: Applied Physics. 50, 2, 025103.

    Research output: Contribution to journal › Article › peer-review

15. Published

    Optimisation of PCPDTBT solar cells using polymer synthesis with Suzuki coupling

    Kettle, J. P., Horie, M., Majewski, L. A., Saunders, B. R., Tuladhar, S., Nelson, J. & Turner, M. L., 1 Aug 2011, In: Solar Energy Materials and Solar Cells. 95, 8, p. 2186-2193

    Research output: Contribution to journal › Article › peer-review

16. Published

    VLSI and Post-CMOS Electronics. Volume 1: Design, modelling and simulation,2019: High performing metal–oxide semiconductor thin-film transistors

    Kettle, J., 2019, VLSI and Post-CMOS Electronics. Volume 1: Design, modelling and simulation,.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

17. Published

    Lead iodide as a buffer layer in UV- induced degradation of CH3NH3PbI3 films

    Kettle, J., 1 Jan 2018, In: Solar Energy. 159, p. 794-799

    Research output: Contribution to journal › Article › peer-review

18. Published

    Studying the outdoor performance of Organic Building-Integrated Photovoltaics laminated to the cladding of a building prototype

    Kettle, J., 1 Mar 2019, In: Solar Energy Materials and Solar Cells.

    Research output: Contribution to journal › Article › peer-review

19. Published

    Rapid evaluation of different Perovskite absorber layers through the application of depth profile analysis using Glow Discharge - Time of Flight Mass Spectrometry

    Kettle, J., 15 Jan 2019, In: Talanta. 192, p. 317-324

    Research output: Contribution to journal › Article › peer-review

20. Published

    Cyclopentadithiophene–benzothiadiazole oligomers: Synthesis via direct arylation, X-ray crystallography, optical properties, solution casted field-effect transistor and photovoltaic characteristics

    Kettle, J. P., Chang, S. W., Waters, H., Kettle, J. & Horie, M., 1 Dec 2012, In: Organic Electronics. 13, 12, p. 2967-2974

    Research output: Contribution to journal › Article › peer-review

21. Published

    Fabrication and characterisation of hybrid photodiodes based on PCPDTBT–ZnO active layers

    Kettle, J. P., Kettle, J., Chang, S. W. & Horie, M., 31 May 2015, In: Microelectronic Engineering. 146, p. 105-108

    Research output: Contribution to journal › Article › peer-review

22. Published

    IR Sensor Based on Low Bandgap Organic Photodiode With Up-Converting Phosphor

    Kettle, J. P., Kettle, J., Chang, S. W. & Horie, M., 28 Jan 2015, In: IEEE Sensors Journal. 15, 6, p. 3221 - 3224

    Research output: Contribution to journal › Article › peer-review

23. Published

    Chemical changes in PCPDTBT:PCBM solar cells using XPS and TOF-SIMS and use of inverted device structure for improving lifetime performance

    Kettle, J. P., Waters, R. H., Kettle, J., Waters, H., Ding, Z., Horie, M. & Smith, G. C., 10 Jun 2015, In: Solar Energy Materials and Solar Cells. 141, p. 139-147

    Research output: Contribution to journal › Article › peer-review

24. Published

    Fabrication of step-and-flash imprint lithography (S-FIL) templates using XeF2 enhanced focused ion-beam ething.

    Kettle, J. P., Kettle, J., Hoyle, R. T. & Dimov, S., 1 Sept 2009, In: Applied Physics A: Materials Science and Processing. 96, 4, p. 819-825

    Research output: Contribution to journal › Article › peer-review

25. Published

    Fabrication of highly transparent self-switching diodes using single layer indium tin oxide.

    Kettle, J. P., Kettle, J., Perks, R. M. & Hoyle, R. T., 1 Jan 2009, In: Electronics Letters. 45, 1, p. 79-80

    Research output: Contribution to journal › Article › peer-review