1. Published

   Dynamic mechanical analysis of Scots pine and three tropical hardwoods

   Ashaduzzaman, M., Hale, M., Ormondroyd, G. & Spear, M., Oct 2020, In: International Wood Products Journal. 11, 4, p. 189-203

   Research output: Contribution to journal › Article › peer-review

2. Published

   British and Irish newspapers implicitly support single-use masks over reusable face coverings

   Auge, A., Tenbrink, T., Spear, M. & Abrams, N., Oct 2023, In: Frontiers in Communication. 8, 15 p., 1256349.

   Research output: Contribution to journal › Article › peer-review

3. Published

   The Viscoelastic Behaviour of Waterlogged Archaeological Wood Treated with Methyltrimethoxysilane

   Broda, M., Spear, M., Curling, S. & Ormondroyd, G., 8 Sept 2021, In: Materials. 14, 18, 20 p.

   Research output: Contribution to journal › Article › peer-review

4. Published

   Effects of Biological and Chemical Degradation on the Properties of Scots Pine—Part II: Wood-Moisture Relations and Viscoelastic Behaviour

   Broda, M., Spear, M., Curling, S. & Dimitriou, A., 31 Aug 2022, In: Forests. 13, 9, 1390.

   Research output: Contribution to journal › Article › peer-review

5. Published

   Effect of methyltrimethoxysilane impregnation on the cell wall porosity and water vapour sorption of archaeological waterlogged oak

   Broda, M., Curling, S., Spear, M. & Hill, C., May 2019, In: Wood Science and Technology.

   Research output: Contribution to journal › Article › peer-review

6. Published

   Physical properties and durability of methacrylate impregnated timber

   Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 28 Sept 2017, Proceedings of the 13th Annual Northern European Network for Wood Science and Engineering Conference. Copenhagen: Univeristy Of Copenhagen

   Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

7. Published

   Effects of Methyl Methacrylate impregnation on durability of timber.

   Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb

   Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

8. Published

   Effects of Methyl Methacrylate impregnation on physical properties of timber

   Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.

   Research output: Contribution to conference › Paper

9. Published

   The effect of four methods of surface activation for improved adhesion of wood polymer composites (WPCs)

   Dimitriou, A., Hale, M. & Spear, M., Jul 2016, In: International Journal of Adhesion and Adhesives. 68, July, p. 188-194

   Research output: Contribution to journal › Article › peer-review

10. Published

    Adding value to UK grown timber in construction: a challenging opportunity in a future market

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

11. Published

    Adding value to UK grown timber by CLT production: A KTP project

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

12. Published

    Knowledge Transfer Partnership. Adding value to UK grown timber in construction

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.

    Research output: Contribution to conference › Paper › peer-review

13. Published

    The effect of pH on surface activation of wood polymer composites (WPCs) with hydrogen peroxide for improved adhesion

    Dimitriou, A., Hale, M. & Spear, M., Oct 2018, In: International Journal of Adhesion and Adhesives. 85, October, p. 44-57 14 p.

    Research output: Contribution to journal › Article › peer-review

14. Published

    Wood Plastic Composites: surface modification with heat to improve the adhesion ability

    Dimitriou, A., Spear, M. & Hale, M., 7 Sept 2015, Advances in modified and functional bio-based surfaces, Proceedings of COST Action FP1006.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

15. Published

    Dynamic mechanical thermal analysis of wood modified with bio-polyesters

    Grosse, C., Spear, M., Curling, S., Noel, M., Rautkari, L., Uimonen, T. & Gerardin, P., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

16. Published

    Effects of Artificial UV weathering and soft rot decay on heat treated wood

    Hale, M., Ghosh, S. C. & Spear, M., 24 Apr 2005, International Research Group on Wood Protection: Working Papers. 13 p. IRG/WP 05-40302

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

17. Published

    An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity

    Hughes, M., Sebe, G., Hague, J., Hill, C., Spear, M. & Mott, L., 2 Apr 2000, In: Composite Interfaces. 7, 1, p. 13-29

    Research output: Contribution to journal › Article › peer-review

18. Published

    Properties of wood following treatment with a modified hot oil

    Jones, D., Tjeerdsma, B., Spear, M. & Hill, C., 6 Oct 2005, Proceedings of the 2nd European Conference on Wood Modification. Militz, H. & Hill, C. (eds.). Goettingen, Germany, p. 202-207 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

19. Published

    Wood Modification with Phenol Formaldehyde Resin and its Influence on the Dimensional Stability of Homegrown and Imported Hardwoods

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 14 Oct 2021, p. 12-15. 4 p.

    Research output: Contribution to conference › Paper

20. Published

    Effects of Process Variables on Wood Modification with PF Resin

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 5 Jul 2022, p. 29-31. 3 p.

    Research output: Contribution to conference › Paper

21. Published

    The Effect of Material Fatigue on Differently Modified Wood

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 25 Apr 2022, p. 292-300. 9 p.

    Research output: Contribution to conference › Paper

22. Published

    The effects of fatigue cycling on acetylated, thermally treated and PF-modified Scots pine

    Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 9 Sept 2020, p. 153-164. 12 p.

    Research output: Contribution to conference › Paper

23. Published

    Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., Feb 2023, In: European Journal of Wood and Wood Products. 81, 1, p. 5-19

    Research output: Contribution to journal › Article › peer-review

24. Published

    The chamical interactions between phenolic resin and wood studied by liquid-state NMR spectroscopy

    Kupfernagel, C., Yelle, D., Spear, M., Pitman, A. & Ormondroyd, G., 15 Apr 2024, p. 104-105. 2 p.

    Research output: Contribution to conference › Paper

25. Published

    Effekt von Prozessvariablen bei Holzmodifikation mit PF-Harz

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 7 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper