Dr Morwenna Spear
Research Fellow
- Published
Laser incision of wood for the modification of liquid impregnation
Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 3 Jul 2019, p. 55-67. 13 p.Research output: Contribution to conference › Paper
- Published
Percussion Nd:YAG Laser-incision of Radiata Pine: Effects of Laser Processing Parameters and Wood Anatomy
Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Curling, S., Pitman, A. & Mason, P., Jun 2022, In: Lasers in Manufacturing and Materials Processing. 9, 2, p. 173-192Research output: Contribution to journal › Article › peer-review
- Published
Laser Incision of woods: effects on liquid penetration
Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 14 Oct 2018. 9 p.Research output: Contribution to conference › Poster › peer-review
- Published
Laser incising of wood: A Review
Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.Research output: Contribution to journal › Article › peer-review
- Published
CO2 laser interactions with wood tissues during single pulse laser-incision
Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.Research output: Contribution to journal › Article › peer-review
- Published
Influence of water and humidity on chemically modifying wood with polybutylene succinate bio-polyester
Noel, M., Grigsby, W. J., Ormondroyd, G. & Spear, M., Jun 2016, In: International Wood Products Journal. 7, 2, p. 80-88Research output: Contribution to journal › Article › peer-review
- Published
Assessment of the use of dynamic mechanical analysis to investigate initial onset of brown rot decay of Scots pine (Pinus sylvestris L.)
Ormondroyd, G., Alfredsen, G., Raghavalu Thirumalai, D., Curling, S., Stefanowski, B., Spear, M. & Gobakken, L. R., May 2017, In: International Biodeterioration and Biodegradation. 120, p. 1-5 5 p.Research output: Contribution to journal › Article › peer-review
- Published
Modified wood: review of efficacy and service life testing
Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203Research output: Contribution to journal › Article › peer-review
- Published
The Opportunities and Challenges for Re-use and Recycling of Timber and Wood Products Within the Construction Sector
Ormondroyd, G. A., Spear, M. J. & Skinner, C. J., 22 Mar 2016, Environmental Impacts of Traditional and Innovative Forest-based Bioproducts; Environmental Footprints and Eco-design of Products and Processes. Muthu, S. S. & Kutnar, A. (eds.). Springer, p. 45-103 59 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter
- Published
An Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials
Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
- Published
The effect of the changes in chemical composition due to thermal treatment on the mechanical properties of Pinus densiflora
Peng, Q., Spear, M., Ormondroyd, G. & Chang, W., 5 Dec 2022, In: Construction and Building Materials. 358, 129303.Research output: Contribution to journal › Article › peer-review
- Published
Challenges in Drying Resin Modified Wood
Pitman, A., Stefanowski, B., Spear, M., Dimitriou, A., Curling, S., Kupfernagel, C. & Ormondroyd, G., 5 Jul 2022, p. 33. 1 p.Research output: Contribution to conference › Paper
- Published
COMPUTER MODEL FOR THE SIMULATION OF RELATIVE HUMIDITY OF AN INDOOR ENVIRONMENT
Raghavalu Thirumalai, D., Spear, M., Curling, S. & Ormondroyd, G., Oct 2018, Proceedings of 29th Inter-American Congress of Chemical Engineering incorporating the 68th Canadian Chemical Engineering Conference. 1 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
- Published
SIMULATION MODEL TO EVALUATE HUMAN COMFORT FACTORS FOR AN OFFICE IN A BUILDING
Raghavalu Thirumalai, D., Curling, S., Spear, M. & Ormondroyd, G., 24 Aug 2018, MDPI AG Proceedings Journal. Vol. 2(15). p. 1126 4 p. https://doi.org/10.3390/proceedings2151126Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
- Published
Plants and architecture: the role of biology and biomimetics in materials development for buildings
Raghavalu Thirumalai, D., Spear, M., Curling, S., Ormondroyd, G., Wootton-Beard, P. C., Donnison, I. & Jones, P., 2019, In: Intelligent Buildings International. 11, 3-4, p. 178-211Research output: Contribution to journal › Article › peer-review
- Published
FLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION
Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.Research output: Contribution to conference › Abstract › peer-review
- Published
Moisture control in oil and bioresin heat treated timber.
Spear, M. J., Fowler, P. A., Hill, C. A., Hale, M. D., Jones, D. (ed.), Militz, H. (ed.) & Ormondroyd, G. A. (ed.), 1 Jan 2007, p. 147-151.Research output: Contribution to conference › Paper
- Published
Phenol Formaldehyde Resin Treatment of End Grain Cobbles for Flooring and Paving Applications
Spear, M., Jones, D., Miles, C. & Ormondroyd, G., 25 Apr 2022, p. 407-414. 8 p.Research output: Contribution to conference › Paper
- Published
Model study to compare drying rate through laser incisions in beech wood
Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.Research output: Contribution to conference › Paper
- Published
Wood in Construction in the UK: An Analysis of Carbon Abatement Potential. Extended Summary. Published as an annex to the Committee on Climate Change report "Biomass in a low-carbon economy".
Spear, M., Hill, C., Norton, A., Price, C. & Ormondroyd, G., 18 Jul 2019, Committee on Climate Change. 28 p.Research output: Book/Report › Commissioned report › peer-review
- Published
Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species
Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
A conceptual methodology for estimating stored sequestered carbon in the built environment
Spear, M., Hill, C. & Price, C., Jan 2021, Smart Innovation, Systems and Technologies, Vol 23, Sustainability and energy in buildings 2020. Littlewood, J. (ed.). Vol. 23. p. 381-393 12 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review
- Published
Comparison of Contemporary Elm (Ulmus spp.) and degraded Archaeological Elm: the use of dynamic mechanical analysis under ambient moisture conditions
Spear, M. & Broda, M., 7 Nov 2020, In: Materials. 13, 21, 5026.Research output: Contribution to journal › Article › peer-review
- Published
Preservation, protection and modification of wood composites
Spear, M. J., 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 253-310Research output: Chapter in Book/Report/Conference proceeding › Chapter
- Published
Emerging nature based materials and their use in new products
Spear, M., 25 Sept 2018, Designing with natural materials. Ormondroyd, G. & Morris, A. (eds.). CRC Press, p. 217-321 104 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter