1. Published

   A conceptual methodology for estimating stored sequestered carbon in the built environment

   Spear, M., Hill, C. & Price, C., Jan 2021, Smart Innovation, Systems and Technologies, Vol 23, Sustainability and energy in buildings 2020. Littlewood, J. (ed.). Vol. 23. p. 381-393 12 p.

   Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

2. Published

   A study of miscanthus straw for composites: microscopy and fibre analysis

   Turner, W., Robson, P., Bosch, M. & Spear, M., 5 Oct 2017, p. 171-173. 3 p.

   Research output: Contribution to conference › Paper

3. Published

   Adding value to UK grown timber by CLT production: A KTP project

   Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.

   Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4. Published

   Adding value to UK grown timber in construction: a challenging opportunity in a future market

   Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.

   Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

5. Published

   An Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials

   Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.

   Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6. Published

   An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity

   Hughes, M., Sebe, G., Hague, J., Hill, C., Spear, M. & Mott, L., 2 Apr 2000, In: Composite Interfaces. 7, 1, p. 13-29

   Research output: Contribution to journal › Article › peer-review

7. Published

   Assessment of the Envelope Effect of Three Hot Oil Treatments: Resistance to Decay by Coniophora puteana and Postia placenta.

   Spear, M. J., Hill, C. A., Curling, S. F., Jones, D. & Hale, M. D., 1 Jan 2006, 2006 ed. Unknown.

   Research output: Book/Report › Commissioned report

8. Published

   Assessment of the use of dynamic mechanical analysis to investigate initial onset of brown rot decay of Scots pine (Pinus sylvestris L.)

   Ormondroyd, G., Alfredsen, G., Raghavalu Thirumalai, D., Curling, S., Stefanowski, B., Spear, M. & Gobakken, L. R., May 2017, In: International Biodeterioration and Biodegradation. 120, p. 1-5 5 p.

   Research output: Contribution to journal › Article › peer-review

9. Published

   Biobased and Bioinspired materials for a modern building design - a research perspective

   Spear, M. J., Raghavalu Thirumalai, D. P., Durai Prabhakaran, R. T., Ormondroyd, G. A., Curling, S. F. & Spear, M., 7 Oct 2015, p. 293-296.

   Research output: Contribution to conference › Paper

10. Published

    Biogenic carbon: its joint roles in bioenergy and carbon sequestration

    Spear, M., Norton, A., Hill, C., Raghavalu Thirumalai, D. & Ormondroyd, G., 6 Sept 2018, p. 53. 1 p.

    Research output: Contribution to conference › Paper

11. Published

    British and Irish newspapers implicitly support single-use masks over reusable face coverings

    Auge, A., Tenbrink, T., Spear, M. & Abrams, N., Oct 2023, In: Frontiers in Communication. 8, 15 p., 1256349.

    Research output: Contribution to journal › Article › peer-review

12. Published

    CO2 laser interactions with wood tissues during single pulse laser-incision

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.

    Research output: Contribution to journal › Article › peer-review

13. Published

    COMPUTER MODEL FOR THE SIMULATION OF RELATIVE HUMIDITY OF AN INDOOR ENVIRONMENT

    Raghavalu Thirumalai, D., Spear, M., Curling, S. & Ormondroyd, G., Oct 2018, Proceedings of 29th Inter-American Congress of Chemical Engineering incorporating the 68th Canadian Chemical Engineering Conference. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

14. Published

    Challenges in Drying Resin Modified Wood

    Pitman, A., Stefanowski, B., Spear, M., Dimitriou, A., Curling, S., Kupfernagel, C. & Ormondroyd, G., 5 Jul 2022, p. 33. 1 p.

    Research output: Contribution to conference › Paper

15. Published

    Chemical changes in mild thermal treatment of larch: to what extent do they differ from full thermal modification?

    Spear, M. J., Cowley, C. D., Binding, T., Dimitriou, A. & Ormondroyd, G. A., 26 Oct 2015.

    Research output: Contribution to conference › Paper

16. Published

    Communication of Uncertainty in Spatial Data to Decision Makers

    Spear, M., Hall, J. & Wadsworth, R. A., 21 May 1996, Proceedings of Spatial Accuracy Assessment in Natural Resources and Environmental Sciences: Second International Symposium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

17. Published

    Comparison of Contemporary Elm (Ulmus spp.) and degraded Archaeological Elm: the use of dynamic mechanical analysis under ambient moisture conditions

    Spear, M. & Broda, M., 7 Nov 2020, In: Materials. 13, 21, 5026.

    Research output: Contribution to journal › Article › peer-review

18. Published

    Comparison of accelerated weathering and field exposed resin modified timber

    Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.

    Research output: Contribution to conference › Paper

19. Published

    Considering timber as biogenic carbon: the built environment and carbon sequestration

    Spear, M., Hill, C., Norton, A. & Price, C., 26 Jun 2018, p. 67-68. 2 p.

    Research output: Contribution to conference › Paper

20. Published

    Demonstrating the suitability of laser incision for timber treatment technologies

    Spear, M., Miles, C., Williams, E., Mason, P., Williams, G., Pitman, A., Bailey, R., Theobald, T., Nath, S. & Waugh, D., 14 Oct 2021, p. 101-103. 3 p.

    Research output: Contribution to conference › Paper

21. Published

    Dimensional instability in timber

    Spear, M. & Walker, J. C. F., 6 Sept 2006, Primary Wood Processing: Principles and Practice. 2nd ed. Springer, p. 95-120

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

22. Published

    Dynamic mechanical analysis of Scots pine and three tropical hardwoods

    Ashaduzzaman, M., Hale, M., Ormondroyd, G. & Spear, M., Oct 2020, In: International Wood Products Journal. 11, 4, p. 189-203

    Research output: Contribution to journal › Article › peer-review

23. Published

    Dynamic mechanical thermal analysis of wood modified with bio-polyesters

    Grosse, C., Spear, M., Curling, S., Noel, M., Rautkari, L., Uimonen, T. & Gerardin, P., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

24. Published

    Effect of methyltrimethoxysilane impregnation on the cell wall porosity and water vapour sorption of archaeological waterlogged oak

    Broda, M., Curling, S., Spear, M. & Hill, C., May 2019, In: Wood Science and Technology.

    Research output: Contribution to journal › Article › peer-review

25. Published

    Effects of Artificial UV weathering and soft rot decay on heat treated wood

    Hale, M., Ghosh, S. C. & Spear, M., 24 Apr 2005, International Research Group on Wood Protection: Working Papers. 13 p. IRG/WP 05-40302

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution