Research Portal

Dr Morwenna Spear

Research Fellow

Affiliations

51 - 84 out of 84Page size: 50
  1. Published

    Physical properties of UK grown larch subjected to mild and moderate thermal modification processes

    Spear, M., Binding, T., Nicholls, J., Jenkins, D. & Ormondroyd, G., 14 Sept 2015.

    Research output: Contribution to conference › Paper

  2. Published

    Communication of Uncertainty in Spatial Data to Decision Makers

    Spear, M., Hall, J. & Wadsworth, R. A., 21 May 1996, Proceedings of Spatial Accuracy Assessment in Natural Resources and Environmental Sciences: Second International Symposium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Biogenic carbon: its joint roles in bioenergy and carbon sequestration

    Spear, M., Norton, A., Hill, C., Raghavalu Thirumalai, D. & Ormondroyd, G., 6 Sept 2018, p. 53. 1 p.

    Research output: Contribution to conference › Paper

  4. Published

    Oil Heat Treatment of Timber for Reduced Hygroscopicity

    Spear, M. J., Spear, M., Fleurentdidier, V., Stefanowski, B. & Ormondroyd, G. A., 7 Sept 2012.

    Research output: Contribution to conference › Paper

  5. Published

    Assessment of the Envelope Effect of Three Hot Oil Treatments: Resistance to Decay by Coniophora puteana and Postia placenta.

    Spear, M. J., Hill, C. A., Curling, S. F., Jones, D. & Hale, M. D., 1 Jan 2006, 2006 ed. Unknown.

    Research output: Book/Report › Commissioned report

  6. Published

    Scale up of mild thermal modification for cladding and joinery products

    Spear, M., Curling, S. & Ormondroyd, G., 3 Jul 2019, p. 113-117. 5 p.

    Research output: Contribution to conference › Paper

  7. Published

    Hot Oil and Resin Treated Timber: Resistance to Decay by Brown Rot Fungi

    Spear, M., Fowler, P., Hill, C. & Elias, R., 20 Sept 2006, Proceedings of ECOWOOD2006, 2nd International Conference on Environmentally-Compatible Forest Products. Fernando Pessoa University, Porto, 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Use of DMA to Evaluate the Modification of Tropical Hardwood Timbers by Cashew Nut Shell Liquid (CNSL) Resin

    Spear, M., Ashaduzzaman, M., Ormondroyd, G. & Hale, M., 25 Apr 2022, p. 142-145. 4 p.

    Research output: Contribution to conference › Poster

  9. Published

    Considering timber as biogenic carbon: the built environment and carbon sequestration

    Spear, M., Hill, C., Norton, A. & Price, C., 26 Jun 2018, p. 67-68. 2 p.

    Research output: Contribution to conference › Paper

  10. Published

    Wood polymer composites

    Spear, M. J., Eder, A. & Carus, M., 1 Aug 2015, Wood Composites. Ansell, M. P. (ed.). 2015 ed. Woodhead Publishing Ltd, p. 195-249

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  11. Published

    Mild thermal modification to enhance the machinability of larch

    Spear, M. J., Binding, T., Jenkins, D., Nicholls, J. & Ormondroyd, G. A., 10 Mar 2014.

    Research output: Contribution to conference › Paper

  12. Published

    Laser Incising - A Philosophical Shift: From Timber Treatment to Wood Modification

    Spear, M., Mason, P., Williams, G. & Ormondroyd, G., 15 Apr 2024, p. 162. 1 p.

    Research output: Contribution to conference › Poster

  13. Published
  14. Published

    Wood based panels in modern methods of construction for housing: greenhouse gas abatement analysis

    Spear, M., Norton, A., Hill, C., Price, C. & Ormondroyd, G., 8 Oct 2019, p. 95-108. 14 p.

    Research output: Contribution to conference › Paper

  15. Published

    Review of Functional Treatments For Modified Wood

    Spear, M., Curling, S., Dimitriou, A. & Ormondroyd, G., 12 Mar 2021, In: Coatings. 11, 3, 29 p., 327.

    Research output: Contribution to journal › Article › peer-review

  16. Published

    Insights into stability of glued joints between thermally modified timber: adaptation of an artificial weathering test

    Spear, M., Teciu, R. & Ormondroyd, G., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Natural Fibre Reinforced Polypropylene Composites: Assessing the Potential of Hemp and TMP Fibre

    Spear, M., Hill, C. & Tomkinson, J., 9 Oct 2002, Proceedings of the 6th European Panel Products Symposium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Dimensional instability in timber

    Spear, M. & Walker, J. C. F., 6 Sept 2006, Primary Wood Processing: Principles and Practice. 2nd ed. Springer, p. 95-120

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  19. Published
  20. Published

    Demonstrating the suitability of laser incision for timber treatment technologies

    Spear, M., Miles, C., Williams, E., Mason, P., Williams, G., Pitman, A., Bailey, R., Theobald, T., Nath, S. & Waugh, D., 14 Oct 2021, p. 101-103. 3 p.

    Research output: Contribution to conference › Paper

  21. Published

    Phenol Formaldehyde Resin Treatment of End Grain Cobbles for Flooring and Paving Applications

    Spear, M., Jones, D., Miles, C. & Ormondroyd, G., 25 Apr 2022, p. 407-414. 8 p.

    Research output: Contribution to conference › Paper

  22. Published

    Model study to compare drying rate through laser incisions in beech wood

    Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.

    Research output: Contribution to conference › Paper

  23. Published

    Wood in Construction in the UK: An Analysis of Carbon Abatement Potential. Extended Summary. Published as an annex to the Committee on Climate Change report "Biomass in a low-carbon economy".

    Spear, M., Hill, C., Norton, A., Price, C. & Ormondroyd, G., 18 Jul 2019, Committee on Climate Change. 28 p.

    Research output: Book/Report › Commissioned report › peer-review

  24. Published

    Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species

    Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    A conceptual methodology for estimating stored sequestered carbon in the built environment

    Spear, M., Hill, C. & Price, C., Jan 2021, Smart Innovation, Systems and Technologies, Vol 23, Sustainability and energy in buildings 2020. Littlewood, J. (ed.). Vol. 23. p. 381-393 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  26. Published

    Comparison of Contemporary Elm (Ulmus spp.) and degraded Archaeological Elm: the use of dynamic mechanical analysis under ambient moisture conditions

    Spear, M. & Broda, M., 7 Nov 2020, In: Materials. 13, 21, 5026.

    Research output: Contribution to journal › Article › peer-review

  27. Published

    Preservation, protection and modification of wood composites

    Spear, M. J., 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 253-310

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  28. Published

    Emerging nature based materials and their use in new products

    Spear, M., 25 Sept 2018, Designing with natural materials. Ormondroyd, G. & Morris, A. (eds.). CRC Press, p. 217-321 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  29. Published

    Review of the use of PF and related resins for modification of solid wood

    Stefanowski, B., Spear, M. & Pitman, A., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 165-179 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Properties of LIGNIA modified wood

    Stefanowski, B. K., Spear, M., Curling, S., Pitman, A., Bailey, R., Mathias, J., Evans, N., Ayala, L., Theobald, T. & Ormondroyd, G., 9 Sept 2020, p. 177-188. 12 p.

    Research output: Contribution to conference › Paper

  31. Published

    Comparison of accelerated weathering and field exposed resin modified timber

    Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.

    Research output: Contribution to conference › Paper

  32. Published

    A study of miscanthus straw for composites: microscopy and fibre analysis

    Turner, W., Robson, P., Bosch, M. & Spear, M., 5 Oct 2017, p. 171-173. 3 p.

    Research output: Contribution to conference › Paper

  33. Published

    Science to Policy: Nature-based solutions for the built environment

    Wiik, E., Ormondroyd, G., Spear, M., Curling, S., Raghavalu Thirumalai Prabhakaran, D., Donnison, I., Robson, P., Bosch, M., Wootton-Beard, P. C., Hindhaugh, R., Jones, P., Waldron, D., Xing, Y. & Toberman, H., Mar 2019, Ser Cymru National Research Network for Low Carbon, Energy and Environment. (Science to Policy)

    Research output: Book/Report › Commissioned report

  34. Published

    Exploring Design Principles of Biological and Living Building Envelopes: What Can We Learn from Plant Cell Walls?

    Xing, Y., Bosch, M., Spear, M., Donnison, I., Ormondroyd, G. & Jones, P., 2018, In: Intelligent Buildings International. 10, 2, p. 78-102

    Research output: Contribution to journal › Article › peer-review

Previous 1 2 Next