Dr Simon Curling
Research Fellow
- Published
Development of a rapid screening method to determine the susceptibility to mould growth of novel construction and insulation products
Stefanowski, B. K., Curling, S. F., Mansour, E. & Ormondroyd, G. A., 10 May 2015.Research output: Contribution to conference › Paper
- Published
Does combining biobased building materials with timber based construction elements have an effect on biological durability?
Curling, S., Stefanowski, B. & Ormondroyd, G., 15 Jun 2018.Research output: Contribution to conference › Paper
- Published
Dynamic mechanical thermal analysis of wood modified with bio-polyesters
Grosse, C., Spear, M., Curling, S., Noel, M., Rautkari, L., Uimonen, T. & Gerardin, P., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Effect of methyltrimethoxysilane impregnation on the cell wall porosity and water vapour sorption of archaeological waterlogged oak
Broda, M., Curling, S., Spear, M. & Hill, C., May 2019, In: Wood Science and Technology.Research output: Contribution to journal › Article › peer-review
- Published
Effect on panel properties following incorporation of reject paper fibre into MDF at a pilot scale
Stefanowski, B. K., Laflin, N. J., Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 22 May 2013.Research output: Contribution to conference › Paper
- Published
Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products
Curling, S., Jones, D., Ormondroyd, G. & Williams, A., 2017, In: Arab Gulf Journal of Scientific Research. 34, 2/3Research output: Contribution to journal › Article › peer-review
- Published
Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products
Lahmer, R. A., Morris, A., Curling, S., Ormondroyd, G., Jones, D. & Williams, A., May 2016, In: Assiut Journal of Agricultural Sciences (AJAS). 47, 2, p. 24-28Research output: Contribution to journal › Article › peer-review
- Published
Effects of Biological and Chemical Degradation on the Properties of Scots ine Wood—Part I: Chemical Composition and Microstructure of the CellWall
Broda, M., Popescu, C. M., Curling, S., Timpu, D. I. & Ormondroyd, G., 22 Mar 2022, In: Materials. 15, 7, 15 p.Research output: Contribution to journal › Article › peer-review
- Published
Effects of Biological and Chemical Degradation on the Properties of Scots Pine Wood-Part I: Chemical Composition and Microstructure of the Cell Wall
Broda, M., Popescu, C-M., Curling, S. F., Timpu, D. I. & Ormondroyd, G. A., 22 Mar 2022, In: Materials. 15, 7Research output: Contribution to journal › Article › peer-review
- Published
Effects of Biological and Chemical Degradation on the Properties of Scots Pine—Part II: Wood-Moisture Relations and Viscoelastic Behaviour
Broda, M., Spear, M., Curling, S. & Dimitriou, A., 31 Aug 2022, In: Forests. 13, 9, 1390.Research output: Contribution to journal › Article › peer-review
- Published
Effects of Methyl Methacrylate impregnation on durability of timber.
Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of ZagrebResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Effects of Methyl Methacrylate impregnation on physical properties of timber
Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.Research output: Contribution to conference › Paper
- Published
Effects on panel properties following incorporation of reject paper fibre into MDF
Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 10 Oct 2013.Research output: Contribution to conference › Paper
- Published
Evaluating mould colonisation and growth on MDF panels modified to sequester Volatile Organic Compounds
Stefanowski, B., Ormondroyd, G. & Curling, S., Dec 2016, In: International Wood Products Journal. 7, 4, p. 188-194Research output: Contribution to journal › Article › peer-review
- Published
Evaluation of the Effect of a Combined Chemical and Thermal Modification of Wood though the Use of Bicine and Tricine
Jones, D., Krzisnik, D., Hocevar, M., Zagar, A., Humar, M., Popescu, C-M., Popescu, M-C., Brischke, C., Nunes, L., Curling, S., Ormondroyd, G. & Sandberg, D., Jun 2022, In: Forests. 13, 6Research output: Contribution to journal › Article › peer-review
- Published
FLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION
Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.Research output: Contribution to conference › Abstract › peer-review
- Published
Feasibility of using straw in a strong, thin, pulp moulded packaging material
Curling, S., Laflin, N., Davies, G., Ormondroyd, G. & Elias, R., Mar 2017, In: Industrial Crops and Products. 97, p. 395-400Research output: Contribution to journal › Article › peer-review
- Published
Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species
Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Fractional separation and structural characterization of chlorophyll and lignin from perennial ryegrass (L-perenne) and cocksfoot grass (D-glomerata)
Xu, F., Liu, C. F., Ren, J. L., Sun, J. X., Sun, R. C., Curling, S. F., Fowler, P. A. & Baird, M., 2007, In: Separation Science and Technology. 42, 8, p. 1809-1829Research output: Contribution to journal › Article › peer-review
- Published
Fractionation and characterization of chlorophyll and lignin from de-juiced Italian ryegrass (Lolium multifolrum) and timothy grass (Phleum pratense)
Xu, F., Zhou, Q. A., Sun, J. X., Liu, C. F., Ren, J. L., Sun, R. C., Curling, S. F., Fowler, P. A. & Baird, M., 1 May 2007, In: Process Biochemistry. 42, 5, p. 913-918Research output: Contribution to journal › Article › peer-review
- Published
Implications of synergistic durability relationships on design of construction elements.
Curling, S. & Ormondroyd, G., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia: European Cooperation in Science and Technology (COST), p. 17-18 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- E-pub ahead of print
Interlaboratory study of the operational stability of automated sorption balances.
Zelinka, S., Glass, S., Lazarcik, E., Thybring, E., Altgen, M., Rautkari, L., Curling, S., Cao, J., Wang, Y., Kunniger, T., Nystrom, G., Dreimol, C. H., Burgert, I., Uyup, M. K. A., Khadiran, T., Roper, M., Broom, D., Schwarzkopf, M., Yudhanto, A., Subah, M., Lubineau, G., Fredriksson, M., Strojecki, M., Olek, W., Majka, J., Pedersen, N. B., Burnett, D., Garcia, A., Verdonck, E., Dreisbach, F., Waguespack, L., Schott, J., Esteban, L., Garcia-Iruela, A., Colinart, T., Remond, R., Mazian, B., Perre, P., Emmerich, L. & Ling, L., 13 Apr 2024, (E-pub ahead of print) In: Adsorption.Research output: Contribution to journal › Article › peer-review
- Published
Knowledge Transfer Partnership. Adding value to UK grown timber in construction
Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.Research output: Contribution to conference › Paper › peer-review
- Published
Laboratory test to determine the effect on durability of combining biobased building materials with timber in construction
Curling, S. & Ormondroyd, G., 4 Jun 2017. 10 p.Research output: Contribution to conference › Paper
- Published
Laser incising of wood: A Review
Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.Research output: Contribution to journal › Article › peer-review