Research Portal

Professor Graham Ormondroyd

Professor

Affiliations

51 - 100 out of 151Page size: 50
Sort by: Title
  1. Published

    Effects of Methyl Methacrylate impregnation on durability of timber.

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  2. Published

    Effects of Methyl Methacrylate impregnation on physical properties of timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.

    Research output: Contribution to conference › Paper

  3. Published

    Effects of Process Variables on Wood Modification with PF Resin

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 5 Jul 2022, p. 29-31. 3 p.

    Research output: Contribution to conference › Paper

  4. Published

    Effects of climate change on biomineralization in a commercial shellfish species, Mytilus edulis L.

    Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 13 Mar 2013.

    Research output: Contribution to conference › Paper

  5. Published

    Effects on panel properties following incorporation of reject paper fibre into MDF

    Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 10 Oct 2013.

    Research output: Contribution to conference › Paper

  6. Published

    Effekt von Prozessvariablen bei Holzmodifikation mit PF-Harz

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 7 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

  7. Published

    Emissions from bio-based building products

    Clauder, L., Mansour, E., Ormondroyd, G. A. & Pfriem, A., 26 Oct 2015.

    Research output: Contribution to conference › Paper

  8. Published

    Emissions from bio-based building products

    Clauder, L., Ormondroyd, G., Mansour, E. & Pfriem, A., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia, p. 1-2 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Equilibrium and dynamic vapour water sorption properties of biochar derived from apple wood

    Popescu, C., Hill, C. A., Anthony, R., Ormondroyd, G. A. & Curling, S., 28 Nov 2014, In: Polymer Degradation and Stability. 111, p. 263-268

    Research output: Contribution to journal › Article › peer-review

  10. Published

    Evaluating mould colonisation and growth on MDF panels modified to sequester Volatile Organic Compounds

    Stefanowski, B., Ormondroyd, G. & Curling, S., Dec 2016, In: International Wood Products Journal. 7, 4, p. 188-194

    Research output: Contribution to journal › Article › peer-review

  11. Published

    Evaluating the optimization of wood modification with polybutylene succinate bio-polyester

    Spear, M. J., Noel, M., Ormondroyd, G. A., Grigsby, W. & Volkmer, T., 26 Oct 2015.

    Research output: Contribution to conference › Paper

  12. Published

    Evaluation of differences in thermal modification as a result of depth profiling. Preliminary investigations into material treated using the Firmolin process

    Segerholm, K., Jones, D., Rautkari, L., Olsson, S., Ormondroyd, G. A., Mansour, E., Leung, G. & Willems, W., 26 Oct 2015.

    Research output: Contribution to conference › Paper

  13. Published

    Evaluation of the Effect of a Combined Chemical and Thermal Modification of Wood though the Use of Bicine and Tricine

    Jones, D., Krzisnik, D., Hocevar, M., Zagar, A., Humar, M., Popescu, C.-M., Popescu, M.-C., Brischke, C., Nunes, L., Curling, S., Ormondroyd, G. & Sandberg, D., Jun 2022, In: Forests. 13, 6

    Research output: Contribution to journal › Article › peer-review

  14. Published

    Evaluation of the mechanical properties of cross laminated bamboo panels by digital image correlation and finite element modeling

    Archila, H. F., Brandon, D., Ansell, M. P., Walker, P. & Ormondroyd, G. A., 13 Aug 2014.

    Research output: Contribution to conference › Paper

  15. Published

    Exploring Design Principles of Biological and Living Building Envelopes: What Can We Learn from Plant Cell Walls?

    Xing, Y., Bosch, M., Spear, M., Donnison , I., Ormondroyd, G. & Jones, P., 2018, In: Intelligent Buildings International. 10, 2, p. 78-102

    Research output: Contribution to journal › Article › peer-review

  16. Published

    FLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION

    Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  17. Published

    Feasibility of using straw in a strong, thin, pulp moulded packaging material

    Curling, S., Laflin, N., Davies, G., Ormondroyd, G. & Elias, R., Mar 2017, In: Industrial Crops and Products. 97, p. 395-400

    Research output: Contribution to journal › Article › peer-review

  18. Published

    Fibreboards and their applications

    Stefanowski, B. K., Ormondroyd, G. A., Stefanowski, B. & Ansell, M. P. (Editor), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 91-102

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  19. Published

    Flax/Epoxy Composite Beams - Simulation of Flexural Stresses

    Ormondroyd, G., Raghavalu Thirumalai, D. & Zhongwei, G., 1 Apr 2019, In: Material Today: Proceedings. 8, 3, p. 760-768

    Research output: Contribution to journal › Article › peer-review

  20. Published

    Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species

    Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Gap-Fillers for Wooden Artefacts Exposed Outdoors—A Review

    Broda, M., Kryg, P. & Ormondroyd, G. A., 12 May 2021, In: Forests. 12, 5, e606.

    Research output: Contribution to journal › Review article › peer-review

  22. Published

    Guest Editorial

    Spear, M. (Editor) & Ormondroyd, G. (Editor), May 2012, In: International Wood Products Journal. 3, 1, p. 1 1 p.

    Research output: Contribution to journal › Editorial

  23. Published

    Guest Editorial

    Spear, M. (Editor) & Ormondroyd, G. (Editor), 3 Sept 2014, In: International Wood Products Journal. 5, 3, p. 129 1 p.

    Research output: Contribution to journal › Editorial

  24. Published

    Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels

    Huang, P., Chew, Y. M., Chang, W.-S., Ansell, M., Lawrence, M., Latif, E., Shea, A., Ormondroyd, G. & Du, H., 30 Mar 2018, In: Construction and Building Materials. 166, p. 35-49 15 p.

    Research output: Contribution to journal › Article › peer-review

  25. Published

    Implications of synergistic durability relationships on design of construction elements.

    Curling, S. & Ormondroyd, G., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia: European Cooperation in Science and Technology (COST), p. 17-18 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Improvement of Indoor Air Quality by MDF panels containing walnut shells

    Stefanowski, B., Ormondroyd, G., Da Silva, C. F., Maskell, D., Ansell, M. P., Dengel, A. & Ball, R. J., Oct 2017, In: Building and Environment. 123, p. 427-436

    Research output: Contribution to journal › Article › peer-review

  27. Published

    Improving the impact of plant science on urban planning and design

    Wootton-Beard, P. C., Xing, Y., Raghavalu Thirumalai, D., Robson, P., Bosch, M., Thornton, J. M., Ormondroyd, G., Jones, P. & Donnison, I., 16 Nov 2016, In: Buildings. 6, 4, 48.

    Research output: Contribution to journal › Article › peer-review

  28. Published

    Influence of water and humidity on chemically modifying wood with polybutylene succinate bio-polyester

    Noel, M., Grigsby, W. J., Ormondroyd, G. & Spear, M., Jun 2016, In: International Wood Products Journal. 7, 2, p. 80-88

    Research output: Contribution to journal › Article › peer-review

  29. Published

    Insights into stability of glued joints between thermally modified timber: adaptation of an artificial weathering test

    Spear, M., Teciu, R. & Ormondroyd, G., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Introduction of the COST FP 1303 Cooperative Performance Test

    Humar, M., Brischke, C., Meyer, L., Lesar, B., Thaler, N., Jones, D., Bardage, S., Belloncle, C., Van den Bulcke, J., Abascal, J. M., Alfredsen, G., Baisch, D., Brunnhuber, B., Cofta, G., Grodås, E., Frühwald Hansson, E., Irle, M., Kallakas, H., Kers, J., Klamer, M., Larsson Brelid, P., Maider, A. B., Mahnert, K. C., Melcher, E., Möller, R., Noël, M., Nunes, L., Ormondroyd, G. A., Palanti, S., Pfabigan, N., Pilgård, A., Rapp, A. O., Schumacher, P., Suttie, E., Teppand, T., Touza, M. & Van Acker, J., 14 May 2015.

    Research output: Contribution to conference › Paper

  31. Published

    Knowledge Transfer Partnership. Adding value to UK grown timber in construction

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.

    Research output: Contribution to conference › Paper › peer-review

  32. Published
  33. Published

    Laser Incising - A Philosophical Shift: From Timber Treatment to Wood Modification

    Spear, M., Mason, P., Williams, G. & Ormondroyd, G., 15 Apr 2024, p. 162. 1 p.

    Research output: Contribution to conference › Poster

  34. Published

    Laser Incision of woods: effects on liquid penetration

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 14 Oct 2018. 9 p.

    Research output: Contribution to conference › Poster › peer-review

  35. Published

    Laser incising of wood: A Review

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.

    Research output: Contribution to journal › Article › peer-review

  36. Published

    Laser incision of wood for the modification of liquid impregnation

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 3 Jul 2019, p. 55-67. 13 p.

    Research output: Contribution to conference › Paper

  37. Published

    Life cycle assessment of a novel tannin-boron association for wood protection

    Hu, J. B., Skinner, C., Ormondroyd, G. A., Pizzi, G. T. & Thevenon, M. F., 25 Aug 2015.

    Research output: Contribution to conference › Paper

  38. Published

    Life cycle assessment of a novel tannin-boron association for wood protection

    Hu, J., Skinner, C., Ormondroyd, G. & Thevenon, M.-F., 1 Feb 2023, In: Science of the Total Environment. 858, 1, 159739.

    Research output: Contribution to journal › Article › peer-review

  39. Published

    Life cycle assessment of pilot-scale wood fibre production using mechanical disc refining at different pressures

    Skinner, C., Stefanowski, B., Heathcote, D., Charlton, A. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 149-155

    Research output: Contribution to journal › Article › peer-review

  40. Published

    MDF Recovery: Recycled MDF technologies for routed and laminated applications

    Ormondroyd, G., Curling, S. & Elias, R., 1 Mar 2017.

    Research output: Contribution to conference › Poster

  41. Published

    Madera modificada: un futuro robusto para la utilización de la madera

    Ormondroyd, G. A., 30 Sept 2011.

    Research output: Contribution to conference › Paper

  42. Published

    Mechanical Characterisation of Green Sandwich Panels – Biomaterial Skins and Natural Fibre Cores

    Raghavalu Thirumalai, D., A. Nassir, N., Ormondroyd, G. & Zhongwei, G., 16 Nov 2017, English.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  43. Published

    Micromorphological studies of surface densified wood

    Laine, K., Segerholm, K., Walinder, M., Rautkari, L., Ormondroyd, G. A., Hughes, M. & Jones, D., 1 Mar 2014, In: Journal of Materials Science. 49, 5, p. 2027-2034

    Research output: Contribution to journal › Article › peer-review

  44. Published

    Mild thermal modification to add value to UK grown larch: monitoring quality, physical properties and benefits

    Spear, M., Dimitriou, A., Binding, T. & Ormondroyd, G., 10 Mar 2016, Forest Resource and Products: Moving Toward a Sustainable Future .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  45. Published

    Mild thermal modification to enhance the machinability of larch

    Spear, M. J., Binding, T., Jenkins, D., Nicholls, J. & Ormondroyd, G. A., 10 Mar 2014.

    Research output: Contribution to conference › Paper

  46. Published

    Model study to compare drying rate through laser incisions in beech wood

    Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.

    Research output: Contribution to conference › Paper

  47. Published

    Modelling and Simulation of Natural Fibre/Epoxy Composites - Prediction of Stress State and Deformations

    Prabhakaran, R. T. D., Gupta, M., Mahajan, P. & Ormondroyd, G. A., 2019, In: International Journal of Materials Engineering Innovation . 10, 2

    Research output: Contribution to journal › Article › peer-review

  48. Published

    Modified wood: review of efficacy and service life testing

    Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203

    Research output: Contribution to journal › Article › peer-review

  49. Published

    Moisture Interactions of wool and wool-based composites

    Curling, S. & Ormondroyd, G., 5 Aug 2022, Wool Fiber Reinforced Polymer Composites. 1 ed. Oxford, United Kingdom : Woodhead Publishing Ltd, Vol. 1. p. 319 - 330 11 p. (The Textile Institute Book Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

  50. Published

    Natural insulation fibres for the absorption of indoor volatile organic compounds

    Ormondroyd, G., Curling, S., Mansour, E. & Marriott, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 3 4 Next