1. Published

   A Protocol for the Sampling of Recycled Wood and the Resulting Chipboard for Contaminant Analysis.

   Ormondroyd, G. A., Fru, C., Irle, M., Maher, K. & Ormondroyd, G., 8 Oct 2003, p. T1-T4.

   Research output: Contribution to conference › Paper

2. Published

   A Sampling Protocol for the Determination of Contaminant Levels in Wood Raw Materials and Finished Board Products.

   Ormondroyd, G. A., Irle, M. & Ormondroyd, G., 9 Oct 2002, p. 154-158.

   Research output: Contribution to conference › Paper

3. Published

   A rapid method for investigating the absorption of formaldehyde from air by wool

   Curling, S. F., Loxton, C. & Ormondroyd, G. A., 1 Apr 2012, In: Journal of Materials Science. 47, 7, p. 3248-3251

   Research output: Contribution to journal › Article › peer-review

4. Published

   A rapid screening method to determine the susceptibility of bio-based construction and insulation products to mould growth

   Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Jan 2017, In: International Biodeterioration and Biodegradation. p. 124-132 8 p., 116.

   Research output: Contribution to journal › Article › peer-review

5. Published

   A simple method for quantifying the PF resin content of composite wood panels.

   Ormondroyd, G. A. & Grisby, W. J., 1 Aug 2002, In: Holz Als Roh-und Werkstoff. 60, 4, p. 313-315

   Research output: Contribution to journal › Article › peer-review

6. Published

   A study of the Dimensional Stabilisation of Rubberwood by Reaction with Acetic and Hexanoic Anhydride

   Hill, C., Rafidah, S., Hill, C. A. & Ormondroyd, G. A., 1 Jan 2006, In: Journal of Tropical Forest Science. 18, 4, p. 261-268

   Research output: Contribution to journal › Article › peer-review

7. Published

   ASSESSMENT AND MONITORING OF AESTHETIC APPEARANCE OF BUILDING BIOMATERIALS ALONG THE SERVICE LIFE

   Ormondroyd, G. & Dimitriou, A., 2017, In: WIT Transactions on Ecology and the Environment . 226, p. 527 536 p.

   Research output: Contribution to journal › Article › peer-review

8. Published

   ASSESSMENT AND MONITORING OF AESTHETIC APPEARANCE OF BUILDING BIOMATERIALS DURING THE SERVICE LIFE

   Sandak, A., Sandak, J., Dimitriou, A., Burud, I., Thiis, T., Gobakken, L. R., Ormondroyd, G. A. & Kraniotis, D., 2018, SUSTAINABLE DEVELOPMENT AND PLANNING IX. Vol. 226. p. 527-536 (WIT Transactions on Ecology and the Environment).

   Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

9. Published

   Absorption of Formaldehyde by different wool types

   Mansour, E., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 285-288.

   Research output: Contribution to conference › Paper

10. Published

    Absorption of Volatile Organic Compounds by Different Wool Types

    Mansour, E., Curling, S. F., Stéphan, A. & Ormondroyd, G. A., Mar 2016, In: Green Materials. 4, 1

    Research output: Contribution to journal › Article › peer-review

11. Published

    Adding value to UK grown timber by CLT production: A KTP project

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

12. Published

    Adding value to UK grown timber in construction: a challenging opportunity in a future market

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

13. Published

    Adhesives for wood composites

    Ormondroyd, G. A. & Ansell, M. P. (ed.), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 47-66

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

14. Published

    An Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials

    Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

15. Published

    An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood.

    Hill, C., Hill, C. A., Forster, S. C., Farahani, M. R., Hale, M. D., Ormondroyd, G. A. & Williams, G. R., 1 Jan 2005, In: International Biodeterioration and Biodegradation. 55, 1, p. 69-76

    Research output: Contribution to journal › Article › peer-review

16. Published

    An investigation on the possible use of coffee silverskin in PLA/PBS composites

    Aghaye Ghazvini, A. K., Curling, S., Ormondroyd, G., Saccani, A. & Sisti, L., 10 Jun 2022, In: Journal of Applied Polymer Science. 139, 22, 10 p., 52264.

    Research output: Contribution to journal › Article › peer-review

17. Published

    Applicability of wood durability testing methods to bio-based building materials

    Curling, S. F., Stefanowski, B. K., Mansour, E. & Ormondroyd, G. A., 10 May 2015.

    Research output: Contribution to conference › Paper

18. Published

    Assessment and monitoring of aesthetic appearance of building biomaterials along the service life

    Ormondroyd, G. & Dimitriou, A., 2017, Proceedings of Timber Structures 2017. p. 1 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

19. Published

    Assessment of health implications related to processing and use of natural wool insulation products

    Mansour, E., Loxton, C., Elias, R. M. & Ormondroyd, G. A., 1 Dec 2014, In: Environment International. 73, p. 402-412

    Research output: Contribution to journal › Article › peer-review

20. Published

    Assessment of lignocellulosic nut wastes as an absorbent for gaseous formaldehyde

    Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Apr 2017, In: Industrial Crops and Products. 98, April, p. 25-28 4 p.

    Research output: Contribution to journal › Article › peer-review

21. Published

    Assessment of the use of dynamic mechanical analysis to investigate initial onset of brown rot decay of Scots pine (Pinus sylvestris L.)

    Ormondroyd, G., Alfredsen, G., Raghavalu Thirumalai, D., Curling, S., Stefanowski, B., Spear, M. & Gobakken, L. R., May 2017, In: International Biodeterioration and Biodegradation. 120, p. 1-5 5 p.

    Research output: Contribution to journal › Article › peer-review

22. Published

    Biobased and Bioinspired materials for a modern building design - a research perspective

    Spear, M. J., Raghavalu Thirumalai, D. P., Durai Prabhakaran, R. T., Ormondroyd, G. A., Curling, S. F. & Spear, M., 7 Oct 2015, p. 293-296.

    Research output: Contribution to conference › Paper

23. Published

    Biogenic carbon: its joint roles in bioenergy and carbon sequestration

    Spear, M., Norton, A., Hill, C., Raghavalu Thirumalai, D. & Ormondroyd, G., 6 Sept 2018, p. 53. 1 p.

    Research output: Contribution to conference › Paper

24. Published

    Broadband dielectric measurement & simulation of e-field curing systems

    Parker, N., Cuenca, J., Gumbleton, R., Dimitriou, A., Ormondroyd, G. & Slocombe, D., 26 Jun 2018, Timber 2018 . Spear, M. (ed.). London, p. 89-98 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

25. Published

    CO2 laser interactions with wood tissues during single pulse laser-incision

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.

    Research output: Contribution to journal › Article › peer-review

26. Published

    COMPUTER MODEL FOR THE SIMULATION OF RELATIVE HUMIDITY OF AN INDOOR ENVIRONMENT

    Raghavalu Thirumalai, D., Spear, M., Curling, S. & Ormondroyd, G., Oct 2018, Proceedings of 29th Inter-American Congress of Chemical Engineering incorporating the 68th Canadian Chemical Engineering Conference. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

27. Published

    Carbon footprint assessment of the North Wales and Mersey Dee economic area

    Ormondroyd, G. & Skinner, C., 6 Jun 2019, 37 p.

    Research output: Book/Report › Commissioned report

28. Published

    Challenges in Drying Resin Modified Wood

    Pitman, A., Stefanowski, B., Spear, M., Dimitriou, A., Curling, S., Kupfernagel, C. & Ormondroyd, G., 5 Jul 2022, p. 33. 1 p.

    Research output: Contribution to conference › Paper

29. Published

    Changes in Cell Wall Volume due to Reaction of Wood with Acetic Anhydride

    Hill, C. A., Kwon, J. H. & Ormondroyd, G. A., 16 Oct 2007.

    Research output: Contribution to conference › Paper

30. Published

    Changes in the cell wall volume of a number of wood species due to reaction with acetic anhydride

    Kwon, J. H., Hill, C. A., Ormondroyd, G. A. & Karim, S., 1 Mar 2007, In: Holzforschung. 61, 2, p. 138-142

    Research output: Contribution to journal › Article › peer-review

31. Published

    Chemical changes in mild thermal treatment of larch: to what extent do they differ from full thermal modification?

    Spear, M. J., Cowley, C. D., Binding, T., Dimitriou, A. & Ormondroyd, G. A., 26 Oct 2015.

    Research output: Contribution to conference › Paper

32. Published

    Chemical composition of natural fibres

    Ormondroyd, G. & Curling, S., 12 Oct 2016, Advanced High Strength Natural Fibre Composites in Construction. Fan, M. & Fu, F. (eds.). 1 ed. Cambridge, UK: Woodhead Publishing Ltd, p. 23-58 35 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

33. Published

    Comparison of accelerated weathering and field exposed resin modified timber

    Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.

    Research output: Contribution to conference › Paper

34. Published

    Comparisons of particleboard produced from Acacia hybrid and a UK commercial particleboard furnish from recycled wood.

    Suffian, M., Ormondroyd, G. A. & Hale, M. D., 1 Jan 2010, In: Journal of Tropical Forest Science. 22, 3, p. 227-236

    Research output: Contribution to journal › Article › peer-review

35. Published

    Conservation process of archaeological waterlogged wood studied by spectroscopy and gradient NMR methods

    Kowalczuk, J., Rachocki, A., Broda, M., Mazela, B., Ormondroyd, G. & Trite-Goc, J., Nov 2019, In: Wood Science and Technology. 53, 6, p. 1207-1222 16 p.

    Research output: Contribution to journal › Article › peer-review

36. Published

    Designing with Natural Materials

    Ormondroyd, G. (ed.), 5 Sept 2018, CRC Press. 352 p.

    Research output: Book/Report › Book

37. Published

    Development of a laboratory testing concept for whole bio- based wall components against fungal colonisation.

    Curling, S., Ormondroyd, G., Mansour, E. & Stefanowski, B., 2015.

    Research output: Contribution to conference › Paper › peer-review

38. Published

    Development of a laboratory testing concept for whole bio-based wall components against fungal colonization

    Stefanowski, B. K., Curling, S. F., Stefanowski, B., Mansour, E. & Ormondroyd, G. A., 4 Mar 2015.

    Research output: Contribution to conference › Paper

39. Published

    Development of a rapid screening method to determine the susceptibility to mould growth of novel construction and insulation products

    Stefanowski, B. K., Curling, S. F., Mansour, E. & Ormondroyd, G. A., 10 May 2015.

    Research output: Contribution to conference › Paper

40. Published

    Dimensional changes in Corsican pine (Pinus nigra Arnold) modified with acetic anhydride measured using a helium pycnometer

    Hill, C. A. & Ormondroyd, G. A., 1 Aug 2004, In: Holzforschung. 58, 4, p. 544-547

    Research output: Contribution to journal › Article › peer-review

41. Published

    Does combining biobased building materials with timber based construction elements have an effect on biological durability?

    Curling, S., Stefanowski, B. & Ormondroyd, G., 15 Jun 2018.

    Research output: Contribution to conference › Paper

42. Published

    Dynamic mechanical analysis of Scots pine and three tropical hardwoods

    Ashaduzzaman, M., Hale, M., Ormondroyd, G. & Spear, M., Oct 2020, In: International Wood Products Journal. 11, 4, p. 189-203

    Research output: Contribution to journal › Article › peer-review

43. Published

    Effect of bio-resin from cashew nut shell liquid (CNSL) on wood decay resistance

    Tverezovskiy, V., Ashaduzzaman, M., Hale, M. D., Tverezovskiy, V. V. & Ormondroyd, G. A., 20 Jun 2013.

    Research output: Contribution to conference › Paper

44. Published

    Effect on panel properties following incorporation of reject paper fibre into MDF at a pilot scale

    Stefanowski, B. K., Laflin, N. J., Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 22 May 2013.

    Research output: Contribution to conference › Paper

45. Published

    Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products

    Curling, S., Jones, D., Ormondroyd, G. & Williams, A., 2017, In: Arab Gulf Journal of Scientific Research. 34, 2/3

    Research output: Contribution to journal › Article › peer-review

46. Published

    Effectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products

    Lahmer, R. A., Morris, A., Curling, S., Ormondroyd, G., Jones, D. & Williams, A., May 2016, In: Assiut Journal of Agricultural Sciences (AJAS). 47, 2, p. 24-28

    Research output: Contribution to journal › Article › peer-review

47. Published

    Effects of Biological and Chemical Degradation on the Properties of Scots ine Wood—Part I: Chemical Composition and Microstructure of the CellWall

    Broda, M., Popescu, C. M., Curling, S., Timpu, D. I. & Ormondroyd, G., 22 Mar 2022, In: Materials. 15, 7, 15 p.

    Research output: Contribution to journal › Article › peer-review

48. Published

    Effects of Biological and Chemical Degradation on the Properties of Scots Pine Wood-Part I: Chemical Composition and Microstructure of the Cell Wall

    Broda, M., Popescu, C-M., Curling, S. F., Timpu, D. I. & Ormondroyd, G. A., 22 Mar 2022, In: Materials. 15, 7

    Research output: Contribution to journal › Article › peer-review

49. Published

    Effects of Methyl Methacrylate impregnation on durability of timber.

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

50. Published

    Effects of Methyl Methacrylate impregnation on physical properties of timber

    Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.

    Research output: Contribution to conference › Paper

51. Published

    Effects of Process Variables on Wood Modification with PF Resin

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 5 Jul 2022, p. 29-31. 3 p.

    Research output: Contribution to conference › Paper

52. Published

    Effects of climate change on biomineralization in a commercial shellfish species, Mytilus edulis L.

    Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 13 Mar 2013.

    Research output: Contribution to conference › Paper

53. Published

    Effects on panel properties following incorporation of reject paper fibre into MDF

    Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 10 Oct 2013.

    Research output: Contribution to conference › Paper

54. Published

    Effekt von Prozessvariablen bei Holzmodifikation mit PF-Harz

    Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 7 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

55. Published

    Emissions from bio-based building products

    Clauder, L., Mansour, E., Ormondroyd, G. A. & Pfriem, A., 26 Oct 2015.

    Research output: Contribution to conference › Paper

56. Published

    Emissions from bio-based building products

    Clauder, L., Ormondroyd, G., Mansour, E. & Pfriem, A., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia, p. 1-2 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

57. Published

    Equilibrium and dynamic vapour water sorption properties of biochar derived from apple wood

    Popescu, C., Hill, C. A., Anthony, R., Ormondroyd, G. A. & Curling, S., 28 Nov 2014, In: Polymer Degradation and Stability. 111, p. 263-268

    Research output: Contribution to journal › Article › peer-review

58. Published

    Evaluating mould colonisation and growth on MDF panels modified to sequester Volatile Organic Compounds

    Stefanowski, B., Ormondroyd, G. & Curling, S., Dec 2016, In: International Wood Products Journal. 7, 4, p. 188-194

    Research output: Contribution to journal › Article › peer-review

59. Published

    Evaluating the optimization of wood modification with polybutylene succinate bio-polyester

    Spear, M. J., Noel, M., Ormondroyd, G. A., Grigsby, W. & Volkmer, T., 26 Oct 2015.

    Research output: Contribution to conference › Paper

60. Published

    Evaluation of differences in thermal modification as a result of depth profiling. Preliminary investigations into material treated using the Firmolin process

    Segerholm, K., Jones, D., Rautkari, L., Olsson, S., Ormondroyd, G. A., Mansour, E., Leung, G. & Willems, W., 26 Oct 2015.

    Research output: Contribution to conference › Paper

61. Published

    Evaluation of the Effect of a Combined Chemical and Thermal Modification of Wood though the Use of Bicine and Tricine

    Jones, D., Krzisnik, D., Hocevar, M., Zagar, A., Humar, M., Popescu, C-M., Popescu, M-C., Brischke, C., Nunes, L., Curling, S., Ormondroyd, G. & Sandberg, D., Jun 2022, In: Forests. 13, 6

    Research output: Contribution to journal › Article › peer-review

62. Published

    Evaluation of the mechanical properties of cross laminated bamboo panels by digital image correlation and finite element modeling

    Archila, H. F., Brandon, D., Ansell, M. P., Walker, P. & Ormondroyd, G. A., 13 Aug 2014.

    Research output: Contribution to conference › Paper

63. Published

    Exploring Design Principles of Biological and Living Building Envelopes: What Can We Learn from Plant Cell Walls?

    Xing, Y., Bosch, M., Spear, M., Donnison, I., Ormondroyd, G. & Jones, P., 2018, In: Intelligent Buildings International. 10, 2, p. 78-102

    Research output: Contribution to journal › Article › peer-review

64. Published

    FLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION

    Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

65. Published

    Feasibility of using straw in a strong, thin, pulp moulded packaging material

    Curling, S., Laflin, N., Davies, G., Ormondroyd, G. & Elias, R., Mar 2017, In: Industrial Crops and Products. 97, p. 395-400

    Research output: Contribution to journal › Article › peer-review

66. Published

    Fibreboards and their applications

    Stefanowski, B. K., Ormondroyd, G. A., Stefanowski, B. & Ansell, M. P. (ed.), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 91-102

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

67. Published

    Flax/Epoxy Composite Beams - Simulation of Flexural Stresses

    Ormondroyd, G., Raghavalu Thirumalai, D. & Zhongwei, G., 1 Apr 2019, In: Material Today: Proceedings. 8, 3, p. 760-768

    Research output: Contribution to journal › Article › peer-review

68. Published

    Fluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species

    Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

69. Published

    Gap-Fillers for Wooden Artefacts Exposed Outdoors—A Review

    Broda, M., Kryg, P. & Ormondroyd, G. A., 12 May 2021, In: Forests. 12, 5, e606.

    Research output: Contribution to journal › Review article › peer-review

70. Published

    Guest Editorial

    Spear, M. (ed.) & Ormondroyd, G. (ed.), May 2012, In: International Wood Products Journal. 3, 1, p. 1 1 p.

    Research output: Contribution to journal › Editorial

71. Published

    Guest Editorial

    Spear, M. (ed.) & Ormondroyd, G. (ed.), 3 Sept 2014, In: International Wood Products Journal. 5, 3, p. 129 1 p.

    Research output: Contribution to journal › Editorial

72. Published

    Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels

    Huang, P., Chew, Y. M., Chang, W., Ansell, M., Lawrence, M., Latif, E., Shea, A., Ormondroyd, G. & Du, H., 30 Mar 2018, In: Construction and Building Materials. 166, p. 35-49 15 p.

    Research output: Contribution to journal › Article › peer-review

73. Published

    Implications of synergistic durability relationships on design of construction elements.

    Curling, S. & Ormondroyd, G., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia: European Cooperation in Science and Technology (COST), p. 17-18 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

74. Published

    Improvement of Indoor Air Quality by MDF panels containing walnut shells

    Stefanowski, B., Ormondroyd, G., Da Silva, C. F., Maskell, D., Ansell, M. P., Dengel, A. & Ball, R. J., Oct 2017, In: Building and Environment. 123, p. 427-436

    Research output: Contribution to journal › Article › peer-review

75. Published

    Improving the impact of plant science on urban planning and design

    Wootton-Beard, P. C., Xing, Y., Raghavalu Thirumalai, D., Robson, P., Bosch, M., Thornton, J. M., Ormondroyd, G., Jones, P. & Donnison, I., 16 Nov 2016, In: Buildings. 6, 4, 48.

    Research output: Contribution to journal › Article › peer-review

76. Published

    Influence of water and humidity on chemically modifying wood with polybutylene succinate bio-polyester

    Noel, M., Grigsby, W. J., Ormondroyd, G. & Spear, M., Jun 2016, In: International Wood Products Journal. 7, 2, p. 80-88

    Research output: Contribution to journal › Article › peer-review

77. Published

    Insights into stability of glued joints between thermally modified timber: adaptation of an artificial weathering test

    Spear, M., Teciu, R. & Ormondroyd, G., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

78. Published

    Introduction of the COST FP 1303 Cooperative Performance Test

    Humar, M., Brischke, C., Meyer, L., Lesar, B., Thaler, N., Jones, D., Bardage, S., Belloncle, C., Van den Bulcke, J., Abascal, J. M., Alfredsen, G., Baisch, D., Brunnhuber, B., Cofta, G., Grodås, E., Frühwald Hansson, E., Irle, M., Kallakas, H., Kers, J., Klamer, M., Larsson Brelid, P., Maider, A. B., Mahnert, K. C., Melcher, E., Möller, R., Noël, M., Nunes, L., Ormondroyd, G. A., Palanti, S., Pfabigan, N., Pilgård, A., Rapp, A. O., Schumacher, P., Suttie, E., Teppand, T., Touza, M. & Van Acker, J., 14 May 2015.

    Research output: Contribution to conference › Paper

79. Published

    Knowledge Transfer Partnership. Adding value to UK grown timber in construction

    Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.

    Research output: Contribution to conference › Paper › peer-review

80. Published

    Laboratory test to determine the effect on durability of combining biobased building materials with timber in construction

    Curling, S. & Ormondroyd, G., 4 Jun 2017. 10 p.

    Research output: Contribution to conference › Paper

81. Published

    Laser Incising - A Philosophical Shift: From Timber Treatment to Wood Modification

    Spear, M., Mason, P., Williams, G. & Ormondroyd, G., 15 Apr 2024, p. 162. 1 p.

    Research output: Contribution to conference › Poster

82. Published

    Laser Incision of woods: effects on liquid penetration

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 14 Oct 2018. 9 p.

    Research output: Contribution to conference › Poster › peer-review

83. Published

    Laser incising of wood: A Review

    Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.

    Research output: Contribution to journal › Article › peer-review

84. Published

    Laser incision of wood for the modification of liquid impregnation

    Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 3 Jul 2019, p. 55-67. 13 p.

    Research output: Contribution to conference › Paper

85. Published

    Life cycle assessment of a novel tannin-boron association for wood protection

    Hu, J. B., Skinner, C., Ormondroyd, G. A., Pizzi, G. T. & Thevenon, M. F., 25 Aug 2015.

    Research output: Contribution to conference › Paper

86. Published

    Life cycle assessment of a novel tannin-boron association for wood protection

    Hu, J., Skinner, C., Ormondroyd, G. & Thevenon, M-F., 1 Feb 2023, In: Science of the Total Environment. 858, 1, 159739.

    Research output: Contribution to journal › Article › peer-review

87. Published

    Life cycle assessment of pilot-scale wood fibre production using mechanical disc refining at different pressures

    Skinner, C., Stefanowski, B., Heathcote, D., Charlton, A. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 149-155

    Research output: Contribution to journal › Article › peer-review

88. Published

    MDF Recovery: Recycled MDF technologies for routed and laminated applications

    Ormondroyd, G., Curling, S. & Elias, R., 1 Mar 2017.

    Research output: Contribution to conference › Poster

89. Published

    Madera modificada: un futuro robusto para la utilización de la madera

    Ormondroyd, G. A., 30 Sept 2011.

    Research output: Contribution to conference › Paper

90. Published

    Mechanical Characterisation of Green Sandwich Panels – Biomaterial Skins and Natural Fibre Cores

    Raghavalu Thirumalai, D., A. Nassir, N., Ormondroyd, G. & Zhongwei, G., 16 Nov 2017, English.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

91. Published

    Micromorphological studies of surface densified wood

    Laine, K., Segerholm, K., Walinder, M., Rautkari, L., Ormondroyd, G. A., Hughes, M. & Jones, D., 1 Mar 2014, In: Journal of Materials Science. 49, 5, p. 2027-2034

    Research output: Contribution to journal › Article › peer-review

92. Published

    Mild thermal modification to add value to UK grown larch: monitoring quality, physical properties and benefits

    Spear, M., Dimitriou, A., Binding, T. & Ormondroyd, G., 10 Mar 2016, Forest Resource and Products: Moving Toward a Sustainable Future .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

93. Published

    Mild thermal modification to enhance the machinability of larch

    Spear, M. J., Binding, T., Jenkins, D., Nicholls, J. & Ormondroyd, G. A., 10 Mar 2014.

    Research output: Contribution to conference › Paper

94. Published

    Model study to compare drying rate through laser incisions in beech wood

    Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.

    Research output: Contribution to conference › Paper

95. Published

    Modelling and Simulation of Natural Fibre/Epoxy Composites - Prediction of Stress State and Deformations

    Prabhakaran, R. T. D., Gupta, M., Mahajan, P. & Ormondroyd, G. A., 2019, In: International Journal of Materials Engineering Innovation . 10, 2

    Research output: Contribution to journal › Article › peer-review

96. Published

    Modified wood: review of efficacy and service life testing

    Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203

    Research output: Contribution to journal › Article › peer-review

97. Published

    Moisture Interactions of wool and wool-based composites

    Curling, S. & Ormondroyd, G., 5 Aug 2022, Wool Fiber Reinforced Polymer Composites. 1 ed. Oxford, United Kingdom : Woodhead Publishing Ltd, Vol. 1. p. 319 - 330 11 p. (The Textile Institute Book Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

98. Published

    Natural insulation fibres for the absorption of indoor volatile organic compounds

    Ormondroyd, G., Curling, S., Mansour, E. & Marriott, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

99. Published

    Non-wood bio-based materials: Wool

    Ormondroyd, G. & Mansour, E., 2017, Performance of Bio-based building materials . 1 ed. Cambridge,UK: Woodhead Publishing Ltd, p. 128-141 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter

100. Published

     Observed and projected changes in the climate based decay hazard of timber in the United Kingdom

     Curling, S. & Ormondroyd, G., 1 Oct 2020, In: Scientific Reports. 10, 8 p., 16287 (2020).

     Research output: Contribution to journal › Article › peer-review